<?xml version="1.0" encoding="utf-8"?>
<feed xml:lang="en" xmlns="http://www.w3.org/2005/Atom"><title>Recent posts to Ethernet Adapter message: Adapter configured. Open all connections</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/cf9c6faef2/" rel="alternate"/><link href="https://forge.codesys.com/forge/talk/Engineering/thread/cf9c6faef2/feed.atom" rel="self"/><id>https://forge.codesys.com/forge/talk/Engineering/thread/cf9c6faef2/</id><updated>2024-04-09T14:47:46.239000Z</updated><subtitle>Recent posts to Ethernet Adapter message: Adapter configured. Open all connections</subtitle><entry><title>Ethernet Adapter message: Adapter configured. Open all connections</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/cf9c6faef2/?limit=25#9c29" rel="alternate"/><published>2024-04-09T14:47:46.239000Z</published><updated>2024-04-09T14:47:46.239000Z</updated><author><name>mibkid17</name><uri>https://forge.codesys.com/u/mibkid17/</uri></author><id>https://forge.codesys.com2f5844c2d1c6a221d5398f1321f61db78114d09c</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;Trying to control 525 with codsys the info from C-4 section. i should input the value in user defined parameters? in the generic device &lt;/p&gt;&lt;/div&gt;</summary></entry><entry><title>Ethernet Adapter message: Adapter configured. Open all connections</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/cf9c6faef2/?limit=25#3c28" rel="alternate"/><published>2023-05-26T20:10:02.006000Z</published><updated>2023-05-26T20:10:02.006000Z</updated><author><name>ellcap</name><uri>https://forge.codesys.com/u/ellcap/</uri></author><id>https://forge.codesys.com30734ab555fcdaa0462e95d1fe1adda0e85dce92</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;So I got it working by not using the EDS File but creating a Generic Device at the correct IP address and following the Powerflex Manual directions for using a register object message read/write. Takes some more setup, but it works.&lt;/p&gt;
&lt;p&gt;Page 236 / C-4 of this manual 20comm-um010_-en-p.pdf for those that may come across this later. &lt;/p&gt;&lt;/div&gt;</summary></entry><entry><title>Ethernet Adapter message: Adapter configured. Open all connections</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/cf9c6faef2/?limit=25#0611" rel="alternate"/><published>2023-05-23T23:15:59.101000Z</published><updated>2023-05-23T23:15:59.101000Z</updated><author><name>ellcap</name><uri>https://forge.codesys.com/u/ellcap/</uri></author><id>https://forge.codesys.com7a83c04e43912e71f6e1c47bbf78640e9a84252f</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;I've been getting the Powerflex drives to talk Ethernet/IP to an Opto 22 Groov Epic. It works quite well so far with the Powerflex 525 family. &lt;/p&gt;
&lt;p&gt;Working with a Powerflex 70, once I have the adapter IP setup at the device, the 20 Comm E module, the Status Dialog String I return in Codesys says "Adapter configured. Open all connections". The Adapter status shows up as Not Running and the Bus shows as not running.&lt;/p&gt;
&lt;p&gt;I've tried setting my always update variables to Enabled 1 and ensuring that a Bus cycle task was defined in PLC Settings. &lt;/p&gt;
&lt;p&gt;I've tried rotating through all of the available EDS files for this device.&lt;/p&gt;
&lt;p&gt;If I set the IP of the Powerflex Comm E module to something incorrect, I do get a different error which is what I'd hope. So I believe that when I have the IP correct it's trying to perform data exchange. Just not sure what to do to &lt;br/&gt;
"Open all connections". &lt;/p&gt;
&lt;p&gt;I appreciate any advice that may appear.&lt;/p&gt;&lt;/div&gt;</summary></entry></feed>