https://forge.codesys.com/forge/talk/Engineering/thread/cfd51db502/2020-09-25T04:35:41.421000ZRecent posts to Connection over VPN - networking2020-09-25T04:35:41.421000Z2020-09-25T04:35:41.421000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.comd202387cb2e3f1af909654978a6f53e80544c71e

<div class="markdown_content"><p>Hi,<br/> this version 3.5.1.x is to old, minimum requirement for CODESYS Automation server is 3.5.8.x,<br/> Filesystem on plc would be needed too, therefore the only way is to by VPN.</p> <p>I would add in CODESYS the remote Gateway (you have installed the EdgeGateway on your PI).<br/> So add a new Gateway with the IP address of your Raspberry PI and scan your plc via this Gateway in CODESYS. This should work.</p></div>

2020-09-23T21:53:01.052000Z2020-09-23T21:53:01.052000Zmikeahttps://forge.codesys.com/u/mikea/https://forge.codesys.com7939aea254787384e390943b32baaff444548fa1

<div class="markdown_content"><p>thanks, have submitted bug report under "error adding PLC to automation server"</p> <p>Unfortunately the runtime on the display/PLC cannot be updated at this time</p></div>

2020-09-23T20:58:32.236000Z2020-09-23T20:58:32.236000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.comce461a44c37922e69abc6f780894091f140530da

<div class="markdown_content"><p>Ok let us If a workaround is possible...write to CODESYS Store - my question - bug report.</p></div>

2020-09-23T19:51:32.302000Z2020-09-23T19:51:32.302000Zmikeahttps://forge.codesys.com/u/mikea/https://forge.codesys.com1089f5dd2d658aef0c354566a1a6d2d54bfece62

<div class="markdown_content"><p>The edgegateway is the latest: 3.5.16.10 (downloaded today)<br/> The PLC (display) however is quite old: </p> <p>Vendor Telestar srl<br/> Device type 4096 / CoDeSys Control Cortex<br/> Version 3.5.1.0<br/> Target ID 272375814</p></div>

2020-09-23T19:24:45.866000Z2020-09-23T19:24:45.866000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com6c8ff44a0fb7bea13cb59972781dd5f0131a8857

<div class="markdown_content"><p>Which runtime version is on your PI installed?</p></div>

2020-09-23T17:32:14.687000Z2020-09-23T17:32:14.687000Zmikeahttps://forge.codesys.com/u/mikea/https://forge.codesys.com796c94b6d32187c9a2da56b9d387f31bdb95059d

<div class="markdown_content"><p>thanks for your feedback</p> <p>have set up the edge gateway on the raspberry pi gateway device, and it is showing in the automation server (green). The display (PLC) is found when running network scan, but there is an error when adding it to the automation server:</p> <p>Unable to add installed PLC (error: Error -1 returned: Writing ID setting failed: 0x0001</p> <p>any thoughts?</p></div>

2020-09-22T19:59:08.607000Z2020-09-22T19:59:08.607000ZMorberishttps://forge.codesys.com/u/morberis/https://forge.codesys.comfbe01dde21cd1e61ecaa6b60d6d1f695568cc361

<div class="markdown_content"><p>Sometimes I've had it where my development system won't see a PLC. In cases like that I need to add a favorite device and I need to specify its IP address.</p> <p>Would a web visualization with the browser in kiosk mode work for you? That's definitely the cheapest way. </p> <p>What Eschwellinger says might be easier for you.</p></div>

2020-09-22T16:50:14.533000Z2020-09-22T16:50:14.533000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com5c60704d0797f7ca34389ac4eb7c1cf974b17966

<div class="markdown_content"><p>Simpler way... Would bei usind CODESYS Automation Server, Install the EdgeGateway to the Pi ans add this EdgeGateway to your Server...and scan your PLC, add it to the Server...login via CODESYSto your remote PLC...</p></div>

2020-09-22T16:27:36.924000Z2020-09-22T16:27:36.924000Zmikeahttps://forge.codesys.com/u/mikea/https://forge.codesys.comb5b06167ec78b54cdf23c70835140b638768b5bc

<div class="markdown_content"><p>Hi<br/> We have a display (on a mobile machine) programmed using Codesys 3.5. Usually we connect to the display over ethernet from a laptop running the development system (over the local tcp/ip gateway, the display has a fixed IP address and we simply connect it directly to the ethernet port on the laptop, the laptop and device are on the same subnet).</p> <p>We now want to connect remotely to the display through a remote access gateway/device on the machine (a linux/raspian box that uses zerotier to create a virtual switch over a vpn). The display (on the machine) and the laptop (in the office) are still on the same subnet (192.168.2.0/24). We can ping the display - no problem, but the local codesys gateway running on the laptop can't find the display. Broadcast seems to be enabled and firewalls are open, so we are not sure what is wrong.</p> <p>We were hoping that the codesys development system would find the display given that they remain on the same subnet. Do we have to install codesys (and a codesys gateway) on our remote access device (running linux)? Or can we solve this in a simpler way.</p> <p>thanks</p></div>