Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

Linux ARM SL + Profinet License Problem

sanya0971
2022-09-09
2022-09-15
  • sanya0971

    sanya0971 - 2022-09-09

    Hello,we bought a package of licenses to work with Linux ARM SL System, Runtime is successfully licensed, but Profinet does not.
    The [0] soft container is empty.
    The [1] soft container on the screen below!
    P.S This configuratin works well on IOT2040 SIMATIC, but on Linux ARM not. Setting (e.g Device name is correct, physical connection also without any problems).
    Thanks.

     
  • eschwellinger

    eschwellinger - 2022-09-09

    check in the library manager if codemeter library is used and resolved.
    (and additional check if you are current Profinet version - by CODESYS installer - any updates available according the wrong IO_link license message in the log))

     
  • sanya0971

    sanya0971 - 2022-09-09

    Helped command "reload" in "PLC Shell".
    But when power is lost, it again cannot find the license. As if starting a service is missing something.
    p.s waited about 10 mins

     

    Last edit: sanya0971 2022-09-09
  • sanya0971

    sanya0971 - 2022-09-14

    Device Reader Screenshots.
    Problem could be solved only with "PLC SHELL -> reload".
    Codemeter lib resolved.
    Any ideas how to fix this?

     

    Last edit: sanya0971 2022-09-14
  • eschwellinger

    eschwellinger - 2022-09-14

    I think you need to resolve the codemeter library in the library manager here:

     
    • sanya0971

      sanya0971 - 2022-09-14

      Unfortunatelly not helped!
      This works only if CodeMeter Service starts before CodesysControl Service.

       
  • eschwellinger

    eschwellinger - 2022-09-14

    oh..this might be, then I would try to delay the runtime start a few seconds.

     
  • sanya0971

    sanya0971 - 2022-09-15

    Problem Solved.
    Gateway address of Linux PLC matched with WiFi))
    So stupid.
    Thanks for Help

     

Log in to post a comment.