Questions about creating your own library

2020-02-27T14:27:17.900000Z

If you want hide namespace,just following the jpg shows!

Tks to Edwin and scott!

Questions about creating your own library

2020-02-27T14:27:17.467000Z

scott_cunningham hat geschrieben:
Ah, OK, the term "Project" is used with two meanings...
In general, project means the CoDeSys file (Open Project, Save Project, New Project). But then there is a difference below that:
You cannot save a project as a library. You must choose to create a library (File -> New -> Empty library). All is not lost, since you can easily copy the whole POU(s) from one "project" to another.
For easy use, the last two step above can be replaced simply with: File -> Save project and install into library repository

I did create a library not a project,and my version is SP5
And I find the settings as jpg shows.Maybe not same to SP8.
After change to profesional I can find save as compiledlibrary.

Another question?How I need not write namespace,like TON without Standard.TON

Tks very much.

Questions about creating your own library

2020-02-27T14:27:17.040000Z

Originally created by: scott_cunningham

Ah, OK, the term "Project" is used with two meanings...

In general, project means the CoDeSys file (Open Project, Save Project, New Project). But then there is a difference below that:

You cannot save a project as a library. You must choose to create a library (File -> New -> Empty library). All is not lost, since you can easily copy the whole POU(s) from one "project" to another.

For easy use, the last two step above can be replaced simply with: File -> Save project and install into library repository

Questions about creating your own library

2020-02-27T14:27:15.769000Z

Hi,
if you would use current Version this will be available as Default.
In older Versions (<sp8) need="" to="" you="" tools-="" change="">Options-Feature-Sets-Switch to Professional
BR
Edwin</sp8)>

Questions about creating your own library

2020-02-27T14:27:15.325000Z

Edwin Schwellinger hat geschrieben:
Hi,
yes Scott thanks for this.
Detail: If you set:
LanguageModelAttribute(Text) := 'qualified-access-only' effects that the symbols of the library are only accessible via the namespace.
Access by using the Namespace is mandatory.
BR
Edwin

Much tks to Edwin!
And I am new one on codesys.So What I should do?

Questions about creating your own library

2020-02-27T14:27:14.864000Z

scott_cunningham hat geschrieben:
A compiled library (save as compiled library) should keep your code hidden. You can also password protect it. Be sure to test!
Whether or not the namespace has to be included depends on the user setting of the system. If you want to shut off include namespace, check your CoDeSys options either under the Project tab or the Tools tab (sorry not in front of my system to know the exact lik).

As the jpg shows.Where can I find the menu (Save as compiled library)?
And if you mind tell where can find the docuement shows the setting about the security.Just in the codesys help?

Tks any way!

Questions about creating your own library

2020-02-27T14:27:13.608000Z

Hi,

yes Scott thanks for this.
Detail: If you set:

LanguageModelAttribute(Text) := 'qualified-access-only' effects that the symbols of the library are only accessible via the namespace.

Access by using the Namespace is mandatory.
BR
Edwin

Questions about creating your own library

2020-02-27T14:27:13.123000Z

Originally created by: scott_cunningham

A compiled library (save as compiled library) should keep your code hidden. You can also password protect it. Be sure to test!

Whether or not the namespace has to be included depends on the user setting of the system. If you want to shut off include namespace, check your CoDeSys options either under the Project tab or the Tools tab (sorry not in front of my system to know the exact lik).

Questions about creating your own library

2020-02-27T14:27:12.631000Z

Questions about creating your own library

2020-02-27T14:27:11.124000Z

Questions about creating your own library
1 how to hide the contents of the library, so that users can not view the code
2 how call the library without writing the namespace, like TON, without the need to write Standard.TON

Tks in advance.

BR Junfeng.Li

Recent posts to Questions about creating your own library

Questions about creating your own library

Questions about creating your own library

Questions about creating your own library

Questions about creating your own library

Questions about creating your own library

Questions about creating your own library

Questions about creating your own library

Questions about creating your own library

Questions about creating your own library

Questions about creating your own library