WAGO PFC200 SMS not working

2020-10-13T14:00:17.715000Z

After install license SMS function not even initialization...:/

WAGO PFC200 SMS not working

2020-10-12T05:43:10.473000Z

Yes this will work...

WAGO PFC200 SMS not working

2020-10-12T05:33:55.523000Z

Yes I have this license installed on Workstation->Softcontainer.

When I remove license form Workstation it will be works ? When I did not have license in workstation I had many error during compilation my project.

WAGO PFC200 SMS not working

2020-10-12T04:21:28.330000Z

Hi,
all prodcuts which have the 'SL' (single license) in the product name need the license activation on plc side.(not on the CODESYS development system machine)

So this license you need to activate in the PFC200, this screenshot is your CODESYS pc softcontainer?
So please write to the CODESYS Store -> my question -> bug report - you need a remove ticket and a new ticket for your PFC200.

WAGO PFC200 SMS not working

2020-10-11T21:10:22.830000Z

How it is possible ??? I have installed library - please find in attachement

WAGO PFC200 SMS not working

2020-10-11T21:05:54.569000Z

Probably I found problem . When I run my PLC in log i noticed that my library is not installed - like attachement "licencja.jpg"

WAGO PFC200 SMS not working

2020-10-11T20:26:29.931000Z

Everything works perfectly after Build->Clean all and RUN PLC. After several minutes sms doesn't work. Without any error. What can be wrong ? Something with memory ? I should something cleaning ?

WAGO PFC200 SMS not working

2020-10-11T16:54:32.570000Z

Let's focus on receiving messages Can I perform the receive function every cycle?

WAGO PFC200 SMS not working

2020-10-09T20:09:56.815000Z

It is my code:

code

reconnect_timepout(IN := (iState = 32767) , PT:=T#1M);

IF ModemFb.xError THEN
err_modem :=TRUE;
ELSE
err_modem :=FALSE;
END_IF

//init
IF NOT xInit THEN
xInit := TRUE;
( This values should be device specific adapted )
comParam.iPortNumber := 4; ( used com port number 1 )
comParam.ComParity := SMS.COM_PARITY.NONE; ( No Parity )
comParam.ComStopBit := SMS.COM_STOPBIT.ONE; ( One stopbit )
comParam.dwBaudrate := 9600; ( Baudrate of 9600 )
comParam.byByteSize := 8; ( Byte size is 8 )
( No hardware handshake is used. When the device needs hardware handshake and it is set to false, it can result in data loss.)
comParam.byHardwareHandshake := FALSE;
comParam.bySoftwareHandshake := FALSE; ( No software handshake is used. )
comConnect.COMParameter := comParam; ( set the parameter to the instance of the function block )
ModemFb.itfConnectionType := comConnect; ( set the connection instance to the modem, that it can connect to the physical device.)
//SendSmsFb.smsInfo.sServiceCenterNr := '';
err_modem :=FALSE;

END_IF

CASE iState OF

0:  (*Timeout is set TO 120seconds, because the first initialization can take a WHILE, depending on the hardware.*)
    ModemFb(xExecute := TRUE, sPin := scPin, udiTimeOut := 120000000);
    IF ModemFb.xDone THEN
        iState := 1;
    ELSIF ModemFb.xError THEN
        iState := 32767;
    END_IF

1:

    ReceiveSmsFb(xExecute:=TRUE, ModemFB := ModemFb, udiTimeOut := 10000000);
    IF ReceiveSmsFb.xDone OR ReceiveSmsFb.xError THEN
        smsrec := ReceiveSmsFb.smsRecv;
        (* This will reset the function block and release the modem lock.*)
        ReceiveSmsFb(xExecute := FALSE, ModemFB := ModemFb);
        iState :=20;
     END_IF


20:     (*check if message is available an check if something is to send*)

    IF Send_Message THEN
       iState := 200;

    ELSE IF smsrec.sText <> '' THEN       
        pt:=ADR(smsrec.sText); // Get the Address of the text variable 
        FOR i:=0 TO  LEN(smsrec.sText)  DO
            char[i]:=pt^; // Assign the value of the pointer to a Character
            pt:=pt+1; // Advance to the next pointer
        END_FOR
        iState :=21;
    ELSE 
        iState:=1;
    END_IF;
    END_IF;



21:   (*check number phone sender'a*)
        IF smsrec.sNumber = '48509605408' THEN 
        iState :=22;
     ELSE
        iState :=100;
    END_IF;


22: (*check if sms is too old*)
   timestamp_hist_hi := time_sys.udiLocal_DateAndTime + timestamp_hist;
   timestamp_hist_lo := time_sys.udiLocal_DateAndTime - timestamp_hist;
   IF (DT_TO_UDINT(smsrec.dtSend) < timestamp_hist_lo) OR (DT_TO_UDINT(smsrec.dtSend) > timestamp_hist_hi) THEN
           iState :=100;
   ELSE
           iState :=23;
   END_IF



23: IF smsrec.sText = 'ON1' THEN
        bool_out_sms:= 1;
        iState :=100;
    ELSE IF smsrec.sText = 'OFF1' THEN
         bool_out_sms:= 0;
         iState :=100;
   ELSE
        iState :=100;
   END_IF;
   END_IF;


100:

    DeleteSmsFb(xExecute:=TRUE, ModemFB := ModemFb, sms := sms_sys.ReceiveSmsFb.smsRecv, udiTimeOut := 10000000);
     IF DeleteSmsFb.xDone OR DeleteSmsFb.xError THEN
        (* This will reset the function block and release the modem lock.*)
        DeleteSmsFb(xExecute := FALSE, ModemFB := sms_sys.ModemFb, sms := smsrec);
        //xExecute_Delete_trig:=FALSE;
        iState :=1;
     END_IF;


200:

            SMS_to_send.sNumber := 'XXXXXXXXX';
            Send_Message:=FALSE;
            SendSmsFb(xExecute:=TRUE, ModemFb := ModemFb, udiTimeOut := 10000000, smsInfo:= SMS_to_send);
            IF SendSmsFb.xDone OR SendSmsFb.xError THEN
                (* This will reset the function block and release the modem lock.*)
                SendSmsFb( xExecute := FALSE, ModemFb := ModemFb);
                iState:=1;
                err_send := SendSmsFb.eError; 
            END_IF


32767: (* error *) ;

    IF reconnect_timepout.Q THEN    
        xInit := FALSE;
        iState :=0;
    END_IF

END_CASE

RTRIG_LICZs1_SMS(CLK:= (time_sys.todNow = TOD#22:00:00 ) OR (time_sys.todNow = TOD#21:54:10 ));
IF RTRIG_LICZs1_SMS.Q THEN

zm_temp := CONCAT('With SMS ', 'everything' );
zm_temp := CONCAT(zm_temp,' OK :)');
SMS_to_send.sText :=  zm_temp;
Send_Message :=TRUE;

END_IF

code

What is wrong ?

WAGO PFC200 SMS not working

2020-10-09T14:44:25.656000Z

Everything works with SMS. Problem was with my code

Recent posts to WAGO PFC200 SMS not working

WAGO PFC200 SMS not working

WAGO PFC200 SMS not working

WAGO PFC200 SMS not working

WAGO PFC200 SMS not working

WAGO PFC200 SMS not working

WAGO PFC200 SMS not working

WAGO PFC200 SMS not working

WAGO PFC200 SMS not working

WAGO PFC200 SMS not working

WAGO PFC200 SMS not working