HTTPClient Onkyo receiver control

2020-05-15T06:43:07.740000Z

Could you please post your current code

HTTPClient Onkyo receiver control

2020-05-14T13:32:23.375000Z

I'm quite lost in this mather, wireshark does not show the above at all with the data sent from codesys.
When I do it with the powershell script, I have exactly the same result as above.

should I use the buffer_to_String function from oscat to extract a string from the array of bytes?
And sent this with httpclient?

HTTPClient Onkyo receiver control

2020-05-14T11:20:04.592000Z

Yes, use that byte array to send data. The data was different because if your string has ASCII characters (or WSTRING has unicode).

If you have STRING of

73 83 67 80 0 0 0 16 0 0 0 8 1 0 0 0 33 49 80 87 82 48 49 13

you will see in wireshark something like

55 51 32 56 51 32 54 55 32 56 48 32 48 32 48 32 48 32 49 54 32 48 32 48 32 48 32 56 32 49 32 48 32 48 32 48 32 51 51 32 52 57 32 56 48 32 56 55 32 56 50 32 52 56 32 52 57 32 49 51

Where 7 = 55, 3 = 51 and so on.

HTTPClient Onkyo receiver control

2020-05-14T11:01:02.651000Z

so the Data array should be sent by the httpclient? I have no errors, but when I check the traffic with wireshark or tcpdump it is not like the traffic generated from the powershell script.
I've tried also the oscat buffer_to_string function and sent the resulting string, but I think the "0"s are causing trouble, not sure however because this is unknown territory for me.

HTTPClient Onkyo receiver control

2020-05-14T08:08:12.530000Z

Oh sorry. I just realized that you have bytes you want to send in that WSTRING, not characters? If so, then that code can't work as the 73 = character seven and three, not byte value 73.

Then you need to create an array of bytes and place the data in there:

    Data : ARRAY[0..200] OF BYTE := [73, 83, 67, 68, 0(*and so on*)];

HTTPClient Onkyo receiver control

2020-05-13T10:38:20.486000Z

Thank you for the support.
Still no success, I need to sent one "0", $0 isn't accepted and $00 doest not work.
When I check the traffic with wireshark on the IP address, it is totally different compared to the powershell script.

HTTPClient Onkyo receiver control

2020-05-13T05:27:39.792000Z

Use STRING instead of WSTRING so you get directly values as bytes. WSTRING is in unicode so it uses 2 bytes for each character and STRING uses one byte for each character.

HTTPClient Onkyo receiver control

2020-05-12T09:15:45.530000Z

I'm struggling to sent a string in byte format to an Onkyo receiver.
The idea was to use the httpclient fb and sent the wstring sTest: WSTRING(200):="73 83 67 80 0 0 0 16 0 0 0 8 1 0 0 0 33 49 80 87 82 48 49 13"; to it
Somewhere in the process I need to do a hex to byte because it should be sent as bytes. Here I'm stuck.

I can control it by a powershell script (attachment), but I cannot convert this script to codesys.

Recent posts to HTTPClient Onkyo receiver control

HTTPClient Onkyo receiver control

HTTPClient Onkyo receiver control

HTTPClient Onkyo receiver control

HTTPClient Onkyo receiver control

HTTPClient Onkyo receiver control

HTTPClient Onkyo receiver control

HTTPClient Onkyo receiver control

HTTPClient Onkyo receiver control