Max lines of code, codesys CNC ?

2025-09-09T11:16:29.590000Z

We updated our help on the queue sizes, see this new page for our recommendations: https://content.helpme-codesys.com/en/CODESYS%20SoftMotion/_sm_preprocessing_queuesize.html

Max lines of code, codesys CNC ?

2025-06-07T13:02:01.494000Z

I have now tried with larger segments, and everything seems to be working now, thank you.

Max lines of code, codesys CNC ?

2025-06-04T17:06:32.223000Z

Hi, yes now its working, to get "QUEUE.bFull" to work, I've had to set the "QUEUE.nNumReservedEntries" to 3.

I've noticed the movement is slowing down when it reaches the end of the "fill Up", must be because of the "checkVelocity" can only see the current "QUEUE".
Any way of solving this ?

        002:        
            WHILE NOT QUEUE.bFull DO                    // when the Queue is full, wait until it has been processed by the following FBs
                n := n + 1;
                GEO.iSourceLine_No := n;    
                GEO.piStartPos := GEO.piDestPos;        // copy last destination 
                GEO.iMoveType := LIN;                   // generate linear movement 
                GEO.iObjNo := GEO.iObjNo + 1;           // calculate number 
                GEO.piDestPos.dX := xp[n];              // generate position 
                GEO.piDestPos.dY := yp[n];
                SMC_CalcLengthGeo(pg := ADR(GEO));      // calculate length of object with the help of the standard function
                SMC_AppendObj(poq:=ADR(QUEUE), pgi:=ADR(GEO));  //append object to queue 
                IF n = UDINT_TO_DINT( SIZEOF(xp)/SIZEOF(xp[1])) THEN    // all target positions processed                                   
                    QUEUE.bEndOfList := TRUE;                       
                    iState := iState + 1;
                    EXIT;
                END_IF

            END_WHILE
            sMC_CheckVelocities(bExecute:= TRUE, poqDataIn:= ADR(QUEUE));   

            bReady := TRUE; // Send message to smc_interpolator to start

Max lines of code, codesys CNC ?

2025-06-04T09:13:27.187000Z

Hi, this is a bug in CODESYS Softmotion. Due to this bug the size is limited to a maximum of 32767 elements.
However, we recommend to use way smaller buffer sizes.
You could use a small buffer (it should be big enough so that it does not run empty when the interpolator processes the elements). In the beginning you fill the buffer in PLC_PRG until it is full. Afterwards, you start the interpolator. The interpolator processes the elements and removes them as soon as it travels past them. In PLC_PRG you check whether new elements can be stored in the buffer (NOT QUEUE.bFull). If the buffer has space, you generate the next elements and add them to the buffer (SMC_AppendObj()).

I hope this helps you.

Max lines of code, codesys CNC ?

2025-06-03T16:52:39.301000Z

Hi, okay here's the project, it's a modified version of "CNC Example 10: Programming Dynamic CNC Paths", no need for G Code text file (i have also tried with G code text file, same problem)

in "PROGRAM PLC_PRG" you can set bStart to true, and the program should start running, go to "PROGRAM CNC" and you can see axis moving.
lrXpos := IoConfig_Globals.XAixs.fSetPosition;
lrYpos := IoConfig_Globals.YAxis.fSetPosition;

Now you can can change the number of movements in the the "PROGRAM PLC_PRG"

From this number of movements in "program PLC_PRG"
BUF : ARRAY[0..32010] OF SMC_GEOINFO;
xp : ARRAY[1..32000] OF REAL;
yp : ARRAY[1..32000] OF REAL;

to this number to this number of movements
BUF : ARRAY[0..132010] OF SMC_GEOINFO;
xp : ARRAY[1..132000] OF REAL;
yp : ARRAY[1..132000] OF REAL;

Now if you start the program again you should see an error in the "sMC_Interpolator: SM3_CNC.SMC_Interpolator;" function block

Let me know if you can not get it running.

Max lines of code, codesys CNC ?

2025-06-03T09:22:18.250000Z

Hi, is it possible to attach the project and g-code?

Max lines of code, codesys CNC ?

2025-06-01T06:56:16.317000Z

Testing Codesys CNC.
SMC Interpolator Throws me an error if my code surpass approximately 32000 lines of code.
(SMC_CNC_INTERNAL_ERROR)
What is the max lines of code SMC Interpoltor can handle ?

I've been thinking breaking the code up into smaller sections, but that gives me a lot problems later if i want to use "Blocksearch" etc.

I need to run approximately 2000000 lines of code.

Recent posts to Max lines of code, codesys CNC ?

Max lines of code, codesys CNC ?

Max lines of code, codesys CNC ?

Max lines of code, codesys CNC ?

Max lines of code, codesys CNC ?

Max lines of code, codesys CNC ?

Max lines of code, codesys CNC ?

Max lines of code, codesys CNC ?