<?xml version="1.0" encoding="utf-8"?>
<feed xml:lang="en" xmlns="http://www.w3.org/2005/Atom"><title>Recent posts to Maximum dynamic limits of MC_MoveLinearAbsolute and MC_MoveLinearRelative</title><link href="https://forge.codesys.com/forge/talk/Motion/thread/a451190dc6/" rel="alternate"/><link href="https://forge.codesys.com/forge/talk/Motion/thread/a451190dc6/feed.atom" rel="self"/><id>https://forge.codesys.com/forge/talk/Motion/thread/a451190dc6/</id><updated>2024-05-08T13:25:06.796000Z</updated><subtitle>Recent posts to Maximum dynamic limits of MC_MoveLinearAbsolute and MC_MoveLinearRelative</subtitle><entry><title>Maximum dynamic limits of MC_MoveLinearAbsolute and MC_MoveLinearRelative</title><link href="https://forge.codesys.com/forge/talk/Motion/thread/a451190dc6/?limit=25#b67c" rel="alternate"/><published>2024-05-08T13:25:06.796000Z</published><updated>2024-05-08T13:25:06.796000Z</updated><author><name>manuknecht</name><uri>https://forge.codesys.com/u/manuknecht/</uri></author><id>https://forge.codesys.comdcaf0c80a09842fcf341faa315e05f4762512576</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;Hello all&lt;/p&gt;
&lt;p&gt;I use an axis group with two linear axes in a kinematic system. Using &lt;code&gt;MC_MoveLinearAbsolute&lt;/code&gt; and &lt;code&gt;MC_MoveLinearRelative&lt;/code&gt;, I am trying to realise dynamic movements (set velocity: 1 m/s, set acceleration: 30 m/s^2) with the highest possible jerk, as I want to compare this with a movement with a trapezoidal velocity profile. However, my measurements show that the axes accelerate with a maximum jerk of approx. 800 m/s^3, even if the value in the function block was set to 10,000 m/s^3.&lt;/p&gt;
&lt;p&gt;I have already increased the dynamic limits of the two axes accordingly (Velocity: 5000 u/s, Acc-/Deceleration: 250'000 u/s^2, Jerk: 100'000'000 u/s^3, where 1 u = 1 mm), but this had no effect.&lt;/p&gt;
&lt;p&gt;I have checked the input parameters of the function blocks and the &lt;code&gt;VelFactor&lt;/code&gt;, &lt;code&gt;AccFactor&lt;/code&gt; and &lt;code&gt;JerkFactor&lt;/code&gt; factors are all set to the maximum (value 1).&lt;/p&gt;
&lt;p&gt;Reducing the cycle time has resulted in a higher jerk, but as we are already working with a cycle time of 1 ms, there is nothing more that can be done here.&lt;/p&gt;
&lt;p&gt;The axes themselves are still a long way from drawing the maximum current, which is why I assume that this should not be a problem either.&lt;/p&gt;
&lt;p&gt;Are there other factors or parameters that influence the dynamic limits and therefore allow faster movements?&lt;/p&gt;
&lt;p&gt;The PLC I am using is a Raspberry Pi 4 and Codesys V3.5 SP20 with all libraries up to date.&lt;/p&gt;
&lt;p&gt;Thanks in advance&lt;br/&gt;
Manuel&lt;/p&gt;&lt;/div&gt;</summary></entry></feed>