https://forge.codesys.com/forge/talk/Runtime/thread/1d040b8102/2020-02-27T15:11:07.427000ZRecent posts to Can any PC with an Ethernet adapter be used as PN_Controller with Codesys?2020-02-27T15:11:07.427000Z2020-02-27T15:11:07.427000ZAnonymoushttps://forge.codesys.com/u/*anonymous/https://forge.codesys.com4d618a65dcc4707f34565ac53cffd8c79faef2e8

<div class="markdown_content"><p><em>Originally created by:</em> Ali Tevfik BAYKENT</p> <p>It worked yes, thank you.<br/> 4.1.0.2980 version of WinPcap was good for me.<br/> I also set the Profinet device communication parameter "reduction ratio" as 16.</p></div>

2020-02-27T15:11:06.784000Z2020-02-27T15:11:06.784000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com78f7a791ce4be9f9c0ccd6fd6eafdcf03132f44a

<div class="markdown_content"><p>Hi,<br/> should work-<br/> you need to install WinPCAP for Control Win.</p> <p>Maybe a deactivation of the Firewall for a first try is an option too. (WinPCap is mandatory)</p> <p>BR<br/> Edwin</p></div>

2020-02-27T15:11:04.963000Z2020-02-27T15:11:04.963000ZAnonymoushttps://forge.codesys.com/u/*anonymous/https://forge.codesys.com760bb07c72e5084ae1ef1f8b5f4016250598b199

<div class="markdown_content"><p><em>Originally created by:</em> Ali Tevfik BAYKENT</p> <p>My problem with my CODESYS: PN_Controller cannot be active (red triangle) and after a network scanning the profinet subscriber S7-1500 is not recognized.<br/> My question: Can any PC with an Ethernet adapter be used as PN_Controller, by running with Codesys?<br/> My configuration: I installed CODESYS Control Win V3 on a mini-PC (Hometech EBOX-C). I would like to make the signal exchange via Profinet, CODESYS as controller. The subscriber is a S7-1500 hard PLC. In the Project configurator, I added Ethernet driver of the PC : Realtech family controller is successfully recognized. Normally I can run CODESYS PLC without any trouble, besides the Profinet function.</p></div>