Two licenses have to be installed forgot to enable one license

2026-02-03T10:26:38.172000Z

Sorry, I've never used Raspy. Maybe someone else can help.

From personal experience, I've had license activation issues, but it was caused by my company firewall, which was blocking traffic from the Codesys license server.
So I found that the license was listed as activated on the server (and therefore used and no longer activable), but it wasn't present in the PLC.
I solved the problem by using an unblocked internet connection when I needed to activate the purchased license ticket.
Since then, the activation process has always worked, and I've never lost any licenses.

Two licenses have to be installed forgot to enable one license

2026-02-03T09:34:06.464000Z

Raspberry Pi MC
Application based license:
CODESYS Control Standard M
CODESYS Visualization M (Could not be installed)

CODESYS Control Standard M pops up with a dialog window where I can select 3 bundled licenses one of which is "Visu S" which I didn't select

Two licenses have to be installed forgot to enable one license

2026-02-02T15:15:46.869000Z

Hi.
What type of PLC do you have?
What activation method do you use?
What license ticket did you purchase and want to activate?
Can you describe the process you followed step by step?

Two licenses have to be installed forgot to enable one license

2026-02-02T12:23:44.195000Z

I have to install "Basic M" and "Visualization M", but it seems that during installation of "Basic M"
you have to enable "Visualization S" I assume if you here after want to install my "Visualization M". And I forgot to enable "Visualization S"
How do I fix that?

Recent posts to Two licenses have to be installed forgot to enable one license

Two licenses have to be installed forgot to enable one license

Two licenses have to be installed forgot to enable one license

Two licenses have to be installed forgot to enable one license

Two licenses have to be installed forgot to enable one license