https://forge.codesys.com/forge/talk/Runtime/thread/4633f6d7bb/2020-02-27T15:11:32.709000ZRecent posts to PFC200 STATUS REGISTERS2020-02-27T15:11:32.709000Z2020-02-27T15:11:32.709000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com25c36bf3014700800e091226030c283c000097c4

<div class="markdown_content"><p>Hi,</p> <p>hm... let me check, think this is possible but how is your SCADA connected by which fieldbus / modbus or is OPC UA an option too for your SCADA?<br/> BR<br/> Edwin</p></div>

2020-02-27T15:11:30.950000Z2020-02-27T15:11:30.950000Zsomlioyhttps://forge.codesys.com/u/somlioy/https://forge.codesys.com45c39f5dcfa598dd5d69e5f6fa126da4292e95df

<div class="markdown_content"><p>Did you read the manual for 8202?</p> <blockquote> <p><strong>Zitat:</strong><br/> 9.5.3 PLC Status Register<br/> Register 0x1040 provides the status (state) that the controller is currently in.<br/> Possible values:<br/> 1 = PLC running − PLC status is RUNNING.<br/> 2 = PLC stopped − PLC status is STOPPED.</p> <p><strong>Zitat:</strong><br/> 9.6 Diagnostics<br/> 9.6.1 Diagnostics for the MODBUS Master<br/> The status of the PLC, or of the control system, can be queried by the MODBUS<br/> master by reading the WAGO-specific register 0x1040 – “PLC Status” using<br/> MODBUS services FC3 (Read Holding Registers) or FC4 (Read Input Registers).<br/> The WAGO-specific register 0x1040 – “PLC Status” is explained in the Section<br/> “PLC Status Registers”.</p> </blockquote></div>

2020-02-27T15:11:30.340000Z2020-02-27T15:11:30.340000ZEric282000https://forge.codesys.com/u/eric282000/https://forge.codesys.com9b84e448c6c0f2c768f010164f0bbaddcd163d41

<div class="markdown_content"><p>i am trying to read the status register from a wago 750-8202 with control fro pfc200 installed.<br/> in the wago manual for e-runtime this is modbus registers 64010 - 64013. i need to be able to tell if the plc has stopped from the remote scada system.<br/> thanks for any help.</p></div>