IO driver for BeagleBone Black SL

2022-09-28T12:38:36.490000Z

Hi Ingo,

The problem was related to device description file. I modified device description file and now ReadInput/WriteOutput functions are called.

Best Regards,

Cagdas

IO driver for BeagleBone Black SL

2022-09-23T17:30:29.315000Z

I don't know your driver. But the GPIO open error sounds suspicious.

Otherwise I can say, that there is no real difference between a BBB and another runtime. When you registered your driver handle (IBase) in UpdateConfiguration correctly, and you used the channels in your project (check device->Task Deployment to be sure), your ReadInput/WriteOutput functions should be called.

IO driver for BeagleBone Black SL

2022-09-23T07:10:24.951000Z

Hi,

We were using Codesys Runtime Toolkit in our products. We had developed an io driver for Codesys Runtime Toolkit.

I tried to include this io driver component for Beaglebone Black SL. I changed the CODESYSControl_User.cfg file under /etc. Then, I run ./codesyscontrol.bin /etc/CODESYSControl.cfg command under /opt/codesys/bin.

In the runtime toolkit case, IoDrvReadInputs and IoDrvWriteOutputs functions are called periodically. You can find the print logs inside codesys_run_time_toolkit.txt.

These functions are not called in Beaglebone Black SL case. In addition, we are getting gpio open errors. What can be wrong with BeagleBone Black SL? I can send you the io driver component if you want.

Best Regards,

Cagdas

Recent posts to IO driver for BeagleBone Black SL

IO driver for BeagleBone Black SL

IO driver for BeagleBone Black SL

IO driver for BeagleBone Black SL