Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I just installed the V3.5 SP17 dev environment. Everything fine, I am able to build simple Modbus master program but when I tried to test it on a Windows controller I am unable to log into it.
I passed the first time login procedure with user name 'Codesys' and a password. When I now try to log into the controller, I get the 'Setting the active path has been aborted' message (see attached scrshot). When I attempt to use a different name or password, I get the 'No device is responding to the scan request' message, so I assume I am matching the correct name and password.
As this seems to be a new feature of the V3.5 SP17, I was unable to google out a solution. Please advise what to check and where or how to pass this.
I get familiar with the Gateway.cfg file. Tried to add interfaces, configuration parameters via IDE, tried to delete and recreate the gateway. Still no success - Gateway not configured properly.
When I scan network with License manager, the device is immediately found. I restarted PC, nothing helped.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
SOLVED. Default project is generated with Control Win V3, but installed is Control Win V3 x64. Once I "updated" the device, everything started to work.
👍
1
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I just installed the V3.5 SP17 dev environment. Everything fine, I am able to build simple Modbus master program but when I tried to test it on a Windows controller I am unable to log into it.
I passed the first time login procedure with user name 'Codesys' and a password. When I now try to log into the controller, I get the 'Setting the active path has been aborted' message (see attached scrshot). When I attempt to use a different name or password, I get the 'No device is responding to the scan request' message, so I assume I am matching the correct name and password.
As this seems to be a new feature of the V3.5 SP17, I was unable to google out a solution. Please advise what to check and where or how to pass this.
I followed the https://forge.codesys.com/forge/talk/Runtime/thread/c75cd203e2/, deleted 5 files and attempted to do the first time login again. It did not help. I forced to disable user management as per the https://faq.codesys.com/display/CDSFAQ/Device+UserManagement.
Now I am not asked for a name and a password, but the message 'Setting the active path has been aborted.' is still there.
Any advice what to check next?
I get familiar with the Gateway.cfg file. Tried to add interfaces, configuration parameters via IDE, tried to delete and recreate the gateway. Still no success - Gateway not configured properly.
When I scan network with License manager, the device is immediately found. I restarted PC, nothing helped.
Probably the issue can be tight to the Codemeter licensing? Or to a fact, I already installed PLCnext Engineer on the same PC?
SOLVED. Default project is generated with Control Win V3, but installed is Control Win V3 x64. Once I "updated" the device, everything started to work.