Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

EtherCAT and Ethernet/IP in the same Pi

Binarii
2016-11-30
2020-09-18
  • Binarii - 2016-11-30

    Hello, I tried to communicate the raspberry with a DP I/O EtherCAT (between cable: eth0) and in the same time with an Omron PLC between Ethernet/IP (with wlan0, using an AP in the PLC). And it doesn't works.
    It communicate succesfully separately. If I try to use only Ethernet/IP it works fine. And if I try to communicate only with EtherCAT, it works fine. But when I add the two types of communications in the project, it doesn't work.
    I guess that I'm not configuring well the task's, but I don't know. Can you help me?

    Thank you,
    Best Regards.

     
  • Binarii - 2016-12-05

    I've tryed lot of things and still not working!
    Please, anyone have an idea?
    Edwin; can you help me?

    Thank you!

     
  • pk998 - 2020-09-14

    Hi Binarii,
    I have the same problem, did you fix it?

     
  • eschwellinger

    eschwellinger - 2020-09-14

    With current version 3.5.16.10?

     
  • pk998 - 2020-09-14

    i update to 3.5.16.10 and it look the same.

     
  • eschwellinger

    eschwellinger - 2020-09-14

    All libs are updated..you need to attach the project

     
  • eschwellinger

    eschwellinger - 2020-09-14

    you need to update the masters in the device tree - >update device Ethercat and update device Ethernet IP
    and Update Profinet..
    and sure if you want to use Ethercat - and any of the other at the same time you need to have Ethercat on an separate network interface. ( PN and EIP could be on the same)

     

    Last edit: eschwellinger 2020-09-14
  • pk998 - 2020-09-18

    Hi, I updated device. But it was not a problem. The problem was in network connection. I had ethercat device connect to one router with Profinet and ethernet devices. Now i have profinet and ethernet connect via wi-fi and ethercat via network card and almost all work fine. i have problem with ethernet device JXC9 connect via wifi (router WNDR3700v2) . info from loger con not connect to IoDrvEthernetIP. IF i connect via network card everything work ok.
    Do you have any idea?

     

Log in to post a comment.