I will try the work around tonight and let you know.  I would like to try to figure this out, so I don't have to work around this and help fix the problem.




From: talk@forge.forge.codesys.com <talk@forge.forge.codesys.com> on behalf of eschwellinger <forge@codesys.com>
Sent: Tuesday, September 8, 2020 1:43 AM
To: [forge:talk] <Runtime@talk.forge.forge.codesys.com>
Subject: [forge:talk] PI 4 Codesyscontrol terminating after 9 seconds
 

please check if this is your problem:
https://forge.codesys.com/forge/talk/Runtime/thread/4d43247a3a/
there is a workaround in this post.
If not let us know there error if you start the plc manually ( how to you'll find in this post too)
BR
Edwin


PI 4 Codesyscontrol terminating after 9 seconds


Sent from forge.codesys.com because you indicated interest in https://forge.codesys.com/forge/talk/Runtime/

To unsubscribe from further messages, please visit https://forge.codesys.com/auth/subscriptions/