https://forge.codesys.com/forge/talk/Runtime/thread/a16df43582/2020-02-27T16:05:06.567000ZRecent posts to No more 4 GB cards ?2020-02-27T16:05:06.567000Z2020-02-27T16:05:06.567000Zmbruckhttps://forge.codesys.com/u/mbruck/https://forge.codesys.comb0ef549a70ac9f55059e14fdeefbe6a3e9ff3827

<div class="markdown_content"><p>Hi Edwin!</p> <p>I'm happy with 8GB (read "I'm too lazy to test once again"). Yet, not much expensive than 4GB. </p> <p>But, anyway, good to know it's possible to use smaller card.</p></div>

2020-02-27T16:05:04.351000Z2020-02-27T16:05:04.351000Zyannickasselin1https://forge.codesys.com/u/yannickasselin1/https://forge.codesys.combe721da7afad6881615d057541eb00c2319fbed7

<div class="markdown_content"><p>I also had problems with the 2.0.1.0 image.<br/> I was able to write it to a 4Gb SD card but it kept freezing while booting.<br/> I'm using a Raspberry Pi B.<br/> I finally was able to make it work by using the 2.0.0.0 image and then update it with the .deb file just like you explained.</p> <p>Thanks.</p></div>

2020-02-27T16:05:03.469000Z2020-02-27T16:05:03.469000Zeschwellingerhttps://forge.codesys.com/u/eschwellinger/https://forge.codesys.com909c7647d42e7d3d4443107052f0b2ef473eae8c

<div class="markdown_content"><p>Hi,</p> <p>no this should work on 4GB sd cards too.<br/> If not this is an accident which we will solve with next version.</p> <p>The workaround is to use the Image from Raspberry Pi organisation:<br/> <a class="" href="http://www.raspberrypi.org/downloads/" rel="nofollow">http://www.raspberrypi.org/downloads/</a></p> <p>and install the debian package from the store download 'CODESYS_Control_for_Raspberry_PI.zip*<em>codesyscontrol_arm_raspberry_V3.5.5.20.deb'</em>*</p> <p>How to do it?<br/> - flash the Image from raspberrypi.org to your 4GB SD<br/> - under Windows copy codesyscontrol_arm_raspberry_V3.5.5.20.deb to the partition which you have access to after installing the image<br/> - open ssh connection (putty - google it) and execute:<br/> sudo dpkg -i /boot/codesyscontrol_arm_raspberry_V3.5.5.20.deb<br/> you could remove after installing the plc the debian package from boot partition by <br/> sudo rm /boot/codesyscontrol_arm_raspberry_V3.5.5.20.deb</p> <p>That's it.<br/> BR<br/> Edwin</p></div>

2020-02-27T16:05:02.622000Z2020-02-27T16:05:02.622000Zmbruckhttps://forge.codesys.com/u/mbruck/https://forge.codesys.com15112478a67090aa1ee230956bfa4a32d8c28a52

<div class="markdown_content"><p>Hi !</p> <p>I have tryed to burn Codesys RPI image to couple (diffrent) 4 Gb SD card. It can't fit. When change to 8 GB card, it's working.</p> <p>Is this normal ? If yes, maybe you consider to update starting documentation and from </p> <blockquote> <p><strong>Zitat:</strong><br/> Additional requirements SD-card (minimum 4GB)</p> </blockquote> <p>to </p> <blockquote> <p><strong>Zitat:</strong><br/> Additional requirements SD-card (minimum 8GB)</p> </blockquote> <p>Best regards !</p> <p>Mladen Bruck</p></div>