Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hello,
I want to connect my CodeSys with Factory IO but every time when I try to click on "START PLC" at the SysTray, nothing happens. After that I tried to start the "CODESYS Control Win V3 x64" program but after 30 seconds I got the following error message: CODESYSControlService.exe: Start Error
One of the following licenses is required:
CodeMeter 101597:13
Failure reason: CmContainer / WibuKey runtime system is not installed!
CodeMeterAct 5000304:13
Failure reason: CmContainer / WibuKey runtime system is not installed!
I installed the latest CodeMeter Runtime and the latest WibuKey Runtime but nothing changed.
I reinstalled the whole CodeSys and the runtimes a several times but I got the same issues.
How can I fix this?
👍
2
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
you need to drag an drop:
"c:\Program Files\CODESYS 3.5.16.40\Temp\Patch_ProtectionUpdateFile.WibuCmRaU"
to the codemeter window - left side ( or double click it)
to have an empty SoftContainer:
"c:\Program Files\CODESYS 3.5.16.40\Temp\3S-Smart_Software_Solutions_Softlicenses.wbb"
with the same procedure.
This all does the installation/setup of CODESYS or the Control Win runtime ( if you use a standalone setup from CODESYS store)
So usually not needed to do manually
Last edit: eschwellinger 2021-03-24
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Solutions:
I set the CodeMeter folders as expection in the default Windows 10 Antivirus software: (C:\Program Files (x86\CodeMeter and C:\Program Files\CodeMeter)
After that I opened the C:\Windows\System32\drivers folder and renamed the "Multikey.sys" file to "Multikey.sys2" (because I can't delete it).
Then I rebooted my system and I delete the "Multikey.sys2" file.
After that I run CodeMeterCC.exe as Administrator and I imported PatchProtectionUpdateFile.WibuCmRaU and SmartSoftwareSolutionsSoftlicenses.wbb (thanks for the help eschwellinger).
And now it finally works!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I want to connect my CodeSys with Factory IO but every time when I try to click on "START PLC" at the SysTray, nothing happens. After that I tried to start the "CODESYS Control Win V3 x64" program but after 30 seconds I got the following error message:
CODESYSControlService.exe: Start Error
One of the following licenses is required:
CodeMeter 101597:13
Failure reason: CmContainer / WibuKey runtime system is not installed!
CodeMeterAct 5000304:13
Failure reason: CmContainer / WibuKey runtime system is not installed!
I installed the latest CodeMeter Runtime and the latest WibuKey Runtime but nothing changed.
I reinstalled the whole CodeSys and the runtimes a several times but I got the same issues.
How can I fix this?
more posts ...
hm.. codemeter is part of the installation of CODESYS
did you disable to install it?
No, I didn't but I downloaded it manually and nothing changed.
you need to drag an drop:
"c:\Program Files\CODESYS 3.5.16.40\Temp\Patch_ProtectionUpdateFile.WibuCmRaU"
to the codemeter window - left side ( or double click it)
to have an empty SoftContainer:
"c:\Program Files\CODESYS 3.5.16.40\Temp\3S-Smart_Software_Solutions_Softlicenses.wbb"
with the same procedure.
This all does the installation/setup of CODESYS or the Control Win runtime ( if you use a standalone setup from CODESYS store)
So usually not needed to do manually
Last edit: eschwellinger 2021-03-24
Hello,
I can't use the drag and drop method so I tried the double click method and I got this error message:
Importing CmActLicense failed, Error 101
Any idea to fix it?
Finally I fixed this issue.
Solutions:
I set the CodeMeter folders as expection in the default Windows 10 Antivirus software:
(C:\Program Files (x86\CodeMeter and C:\Program Files\CodeMeter)
After that I opened the C:\Windows\System32\drivers folder and renamed the "Multikey.sys" file to "Multikey.sys2" (because I can't delete it).
Then I rebooted my system and I delete the "Multikey.sys2" file.
After that I run CodeMeterCC.exe as Administrator and I imported PatchProtectionUpdateFile.WibuCmRaU and SmartSoftwareSolutionsSoftlicenses.wbb (thanks for the help eschwellinger).
And now it finally works!