https://forge.codesys.com/forge/talk/Visualization/thread/df03e55075/2021-06-30T07:23:52.028000ZRecent posts to stucked visualization2021-06-30T07:23:52.028000Z2021-06-30T07:23:52.028000Zm.prestelhttps://forge.codesys.com/u/mprestel/https://forge.codesys.com8c84ddd451f08b8533ca913f7c87fb1e19c31e85

<div class="markdown_content"><p>The HMI should write a log file.<br/> If not, you can enable file logging in your CODESYSHMI.cfg in the section "CmpLog"<br/> Just remove all ";" and you should be good (just need Logger0)</p> <p>Best regards,<br/> Marcel</p></div>

2021-06-14T09:26:25.235000Z2021-06-14T09:26:25.235000Zmirki77https://forge.codesys.com/u/mirki77/https://forge.codesys.com5dff27985b48fac59a84fd049c4a93fbc345bc5c

<div class="markdown_content"><p>Hello, I have Codesys HMI visualization on PC with license. There are 13 datasources from remote plcs. It is connected over wireguard. I also program it remotely over wireguard net.<br/> I have problem with visualization that it stuck once or twice a day. Visualization don´t draw all pictures and isn´t possible click on buttons. Also when I want connect over Codesys firstly I see device on network, but when I try to connent, isn´t possible and device than hides from network. When I manually close application over VNC and start again, it run good again, but connecting from Codesys is only possible when I restart HMI PC. <br/> How can I find a problem? Is there on PC any logs with problem report? Application LOG in Codesys is cleared by restart.<br/> Thanks</p></div>