Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

stefan2:

narco22
2022-12-07
2024-02-21
  • narco22 - 2022-12-07

    Hallo Stefan Dreyer oder Stefan2,

    ich verwende das OLED-Display SSD1306 und die von dir reingestellte Library dazu (für CoDeSys). Die Kommunikation mit dem Display scheint zu funktionieren. Ich kann es aus, an und den Kontrast verändern. Leider nicht mehr. Beim Anschalten zeigt das Display ein Rauschen an. Woher kommt das?
    Gibt es für die integrierten Methoden in der Bibliothek Beschreibungen zu den Methoden, wie diese funktionieren (Belegung der Eingänge)?

    Vorab schon mal danke.


    Talk Topic about project #stefan2

     
  • andrax

    andrax - 2022-12-15

    Stefan scheint schon lange nicht mehr aktiv zu sein.
    Er gibt auch kein Support für seine MUX Bibliothek.

     
  • hermsen

    hermsen - 2022-12-21

    Sry people, please use English here ;-) 👍

     
  • narco22 - 2023-01-02

    Hello h-hermsen,
    in my comment I mean I am using the OLED display SSD1306 and the uploaded Library. The communication between display and BeagleBone Black seems to work. It can be switched on and off and set the contrast. Unfortunateley not more (e.g. writing a sign). After switching on the display it shows a noise, like snowflakes. What is the reason? Are there any descriptions for the integrated methods of the library (e.g. how to assign inputs of the methods)?

    Thanks!

     

Log in to post a comment.