Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
How to select the real I/O module terminals/channels in CODESYS V3.5 ? Or better to say, How to specify the real physical terminals of analog and digital I/O modules in the CODESYS programm ?
i'm using CODESYS V3.5 to program a physical system with ifm_PLC AC14 series.
The first step is that i have to be able to connent the PLC system with CODESYS.
So, i have to define for PLC throgh CODESYS at first the real terminals of I/O modules, which are used for sensors and actuators with coressponding among of DC current/voltage. Thus:
1) How to select the available I/O modules ? for ex. if i have 2 analog modules and 1 digital module with them factory charc. 2) How to assign the variables to the used coressponding terminals/channels of the existing analgo or digital I/O ?
I have searched many times in youtube or google about it, but i did not found something relevant for my case espically in CODESYS V3.5 .
I have just found this below example which i exactly mean that, but it's unfortunatly for codesys V2 and i don't find it in CODESYS V3.
So, I am really thankful if somebody could help me.
hello everyone,
i'm using CODESYS V3.5 to program a physical system with ifm_PLC AC14 series.
The first step is that i have to be able to connent the PLC system with CODESYS.
So, i have to define for PLC throgh CODESYS at first the real terminals of I/O modules, which are used for sensors and actuators with coressponding among of DC current/voltage. Thus:
I have searched many times in youtube or google about it, but i did not found something relevant for my case espically in CODESYS V3.5 .
I have just found this below example which i exactly mean that, but it's unfortunatly for codesys V2 and i don't find it in CODESYS V3.
So, I am really thankful if somebody could help me.