Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
After a short usage, updating and debugging from CodeSYS Online mode, my PFC200 (with CODESYS Control for PFC200) becomes very unresponsive. When checking in Linux, the /var/log/wago/wago.log is overwhelmed with messages like:
Wed Apr 13 2022 21:41:02.877255 0x00050301 codesys: S
Wed Apr 13 2022 21:41:02.878055 0x00050100 codesys: S
Wed Apr 13 2022 21:41:02.895164 0x00050401 codesys: S
Wed Apr 13 2022 21:41:02.896549 0x00050200 codesys: S
Wed Apr 13 2022 21:41:02.897287 0x00050301 codesys: S
Wed Apr 13 2022 21:41:02.898087 0x00050100 codesys: S
Wed Apr 13 2022 21:41:02.915104 0x00050401 codesys: S
Wed Apr 13 2022 21:41:02.916489 0x00050200 codesys: S
Wed Apr 13 2022 21:41:02.917227 0x00050301 codesys: S
Wed Apr 13 2022 21:41:02.918027 0x00050100 codesys: S
syslog-ng is taking 50% cpu. I just update from 3.x to the 4.4.0.0 version. The PFC200 worked fine for years with the old version, both operations and debugging. What is happening here?? What do these messages mean?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
After a short usage, updating and debugging from CodeSYS Online mode, my PFC200 (with CODESYS Control for PFC200) becomes very unresponsive. When checking in Linux, the /var/log/wago/wago.log is overwhelmed with messages like:
Wed Apr 13 2022 21:41:02.877255 0x00050301 codesys: S
Wed Apr 13 2022 21:41:02.878055 0x00050100 codesys: S
Wed Apr 13 2022 21:41:02.895164 0x00050401 codesys: S
Wed Apr 13 2022 21:41:02.896549 0x00050200 codesys: S
Wed Apr 13 2022 21:41:02.897287 0x00050301 codesys: S
Wed Apr 13 2022 21:41:02.898087 0x00050100 codesys: S
Wed Apr 13 2022 21:41:02.915104 0x00050401 codesys: S
Wed Apr 13 2022 21:41:02.916489 0x00050200 codesys: S
Wed Apr 13 2022 21:41:02.917227 0x00050301 codesys: S
Wed Apr 13 2022 21:41:02.918027 0x00050100 codesys: S
syslog-ng is taking 50% cpu. I just update from 3.x to the 4.4.0.0 version. The PFC200 worked fine for years with the old version, both operations and debugging. What is happening here?? What do these messages mean?
which Wago Firmware?
check CODESYS plc log:
cat /tmp/codesyscontrol.log