https://forge.codesys.com/u/aleksahin6824/activity/Recent activity for aleksahin6824enSun, 30 Aug 2026 22:01:01 -0000https://forge.codesys.com/forge/talk/Engineering/thread/d2f2e67f3b/?limit=25#529dGood afternoon Please help with localizing the error. Periodically, but on the same time grid, the error SysEthernet: packet could not be sent occurs. PLC and motors from XINJE. PLC — XSA-330L, rev. 1.2, drivers — DC5C2 (rev.5) In the task configurator, all tasks are set to simple numbers (11, 13, 41 ms) for convenience. The jitter for EtherCat and SoftMotion tasks is less than the task cycle (2 ms jitter for a 6 ms task). The power supply is sufficient for both the PLC and the motors. The cables...aleksahin6824Sun, 30 Aug 2026 22:01:01 -0000https://forge.codesys.com/forge/talk/Engineering/thread/d2f2e67f3b/?limit=25#529dhttps://forge.codesys.com/forge/talk/Engineering/thread/df49c6f1e6/?limit=25#77f8Good afternoon Please help with localizing the error. Periodically, but on the same time grid, the error SysEthernet: packet could not be sent occurs. PLC and motors from XINJE. PLC — XSA-330L, rev. 1.2, drivers — DC5C2 (rev.5) In the task configurator, all tasks are set to simple numbers (11, 13, 41 ms) for convenience. The jitter for EtherCat and SoftMotion tasks is less than the task cycle (2 ms jitter for a 6 ms task). The power supply is sufficient for both the PLC and the motors. The cables...aleksahin6824Sun, 30 Aug 2026 22:00:56 -0000https://forge.codesys.com/forge/talk/Engineering/thread/df49c6f1e6/?limit=25#77f8