Activity for ane-stehttps://forge.codesys.com/u/ane-ste/activity/2022-10-07T06:04:10.191000ZRecent activity for ane-steane-ste posted a comment on discussion Engineering 🇬🇧2022-10-07T06:04:10.191000Z2022-10-07T06:04:10.191000Zane-stehttps://forge.codesys.com/u/ane-ste/profile/https://forge.codesys.com/forge/talk/Engineering/thread/00eeaa5695/?limit=25#fd57Hey all, I am trying connect raspberry pi with instaled codesys to s7-1200 via Profinet. I can't get connected behind devices, despide of I see raspbbery pi in tia portal when I scanning network. The raspberry was configured as same as on page: https://content.helpme-codesys.com/en/CODESYS%20PROFINET/_pnio_runtime_configuration_device.html The PLC is master, so in codesys is defined profinet device. Also I generated GSD file from codesys and imported to TIA portal. After connection with device codesys...ane-ste posted a comment on discussion Engineering 🇬🇧2022-10-07T06:04:09.119000Z2022-10-07T06:04:09.119000Zane-stehttps://forge.codesys.com/u/ane-ste/profile/https://forge.codesys.com/forge/talk/Engineering/thread/18f0682fc8/?limit=25#3fa0Hey all, I am trying connect raspberry pi with instaled codesys to s7-1200 via Profinet. I can't get connected behind devices, despide of I see raspbbery pi in tia portal when I scanning network. The raspberry was configured as same as on page: https://content.helpme-codesys.com/en/CODESYS%20PROFINET/_pnio_runtime_configuration_device.html The PLC is master, so in codesys is defined profinet device. Also I generated GSD file from codesys and imported to TIA portal. After connection with device codesys...ane-ste posted a comment on discussion Engineering 🇬🇧2022-10-07T06:04:04.763000Z2022-10-07T06:04:04.763000Zane-stehttps://forge.codesys.com/u/ane-ste/profile/https://forge.codesys.com/forge/talk/Engineering/thread/c9dd70eefd/?limit=25#05e3Hey all, I am trying connect raspberry pi with instaled codesys to s7-1200 via Profinet. I can't get connected behind devices, despide of I see raspbbery pi in tia portal when I scanning network. The raspberry was configured as same as on page: https://content.helpme-codesys.com/en/CODESYS%20PROFINET/_pnio_runtime_configuration_device.html The PLC is master, so in codesys is defined profinet device. Also I generated GSD file from codesys and imported to TIA portal. After connection with device codesys...