https://forge.codesys.com/u/bingo/activity/2025-03-03T10:24:44.657000ZRecent activity for bingo2025-03-03T10:24:44.657000Z2025-03-03T10:24:44.657000Zbingohttps://forge.codesys.com/u/bingo/profile/https://forge.codesys.com/forge/talk/forge/thread/715b2f1c3c/?limit=25#abb2

Suppose you need to switch PLC IP dynamically between 192.168.1.10\192.168.2.10, First, set PLC IP to 192.16.1.10. Create a PGVL with a flag ‘xUseSecondry’ xUseSecondry : bool ; create a function that use socket to update IP: FUNCTION fSwitchIP : bool VAR_INPUT useMainIP:bool; END_VAR --------------------------------CODE------ if useMainIP then SysSockSetIPAddress(‘0’, ‘192.168.1.10’); PGVL.xUseSecondry := 0; else SysSockSetIPAddress(‘0’, ‘192.168.2.10’); PGVL.xUseSecondry := 1; end_if Now, if during...

2025-03-02T13:35:17.549000Z2025-03-02T13:35:17.549000Zbingohttps://forge.codesys.com/u/bingo/profile/https://forge.codesys.com/forge/talk/forge/thread/715b2f1c3c/?limit=25#2b2c

For a permanent change, you may need to update the PLC configuration file or set the IP at startup using retained variables.

2023-03-29T09:30:46.457000Z2023-03-29T09:30:46.457000Zbingohttps://forge.codesys.com/u/bingo/profile/https://forge.codesys.com/forge/talk/Runtime/thread/7f12b2aab9/?limit=25#b1e3

I have an application stored at PlsPrg, it is not a boot application. the RTE is running, there is no application shown in the RTE info. I would like to run the application. Is it possible to do it via PLC command line?