https://forge.codesys.com/u/danieldiaz/activity/2024-04-05T08:26:36.289000ZRecent activity for danieldiaz2024-04-05T08:26:36.289000Z2024-04-05T08:26:36.289000Zdanieldiazhttps://forge.codesys.com/u/danieldiaz/profile/https://forge.codesys.com/forge/talk/CODESYS-V2/thread/d15bec3287/?limit=25#ec40/6a33

Problem Solved, I was overwriting the variables somewhere else

2024-04-02T11:08:56.972000Z2024-04-02T11:08:56.972000Zdanieldiazhttps://forge.codesys.com/u/danieldiaz/profile/https://forge.codesys.com/forge/talk/CODESYS-V2/thread/d15bec3287/?limit=25#ec40

Hello everyone, I've been working on a system which needs an error function, with this purpose I've created a FB programmed in LD, after debugging I run the simulation. It seems that the variable linked to a coil doesn't change the value when the contacts are associated to input variables. When I use internal variables the logic works properly. I don't know if the problem is related to the variables definition or with the logic program. As you can see in the image, I1 and I2 are variables declared...

2024-04-02T10:01:07.347000Z2024-04-02T10:01:07.347000Zdanieldiazhttps://forge.codesys.com/u/danieldiaz/profile/https://forge.codesys.com/forge/talk/CODESYS-V2/thread/d15bec3287/?limit=25#ec40

Hello everyone, I've been working on a system which needs an error function, with this purpose I've created a FB programmed in LD, after debugging I run the simulation. It seems that the variable linked to a coil doesn't change the value when the contacts are associated to input variables. When I use internal variables the logic works properly. I don't know if the problem is related to the variables definition or with the logic program. As you can see in the image, I1 and I2 are variables declared...