Activity for erik.gerrits

Activity for erik.gerritshttps://forge.codesys.com/u/erik-gerrits/activity/2026-07-10T13:29:10.337000ZRecent activity for erik.gerritserik.gerrits posted a comment on discussion Visualization 🇬🇧2026-07-10T13:29:10.337000Z2026-07-10T13:29:10.337000Zerik.gerritshttps://forge.codesys.com/u/erik-gerrits/profile/https://forge.codesys.com/forge/talk/Visualization/thread/9b72b96580/?limit=25#cf50

I ran into this issue as well. Here is the fix: Good example: CASE iBitmap OF 0 : sName := 'ImagePool.image0'; 1 : sName := 'ImagePool.image1'; END_CASE Bad example (this will only work on the target device, WebVisu will show a blank rectangle): CASE iBitmap OF 0 : sName := '/home/cds-apps/PlcLogic/visu/image0.png'; 1 : sName := '/home/cds-apps/PlcLogic/visu/image1.png'; END_CASE

erik.gerrits posted a comment on discussion Visualization 🇬🇧2023-03-08T17:25:24.900000Z2023-03-08T17:25:24.900000Zerik.gerritshttps://forge.codesys.com/u/erik-gerrits/profile/https://forge.codesys.com/forge/talk/Visualization/thread/93fcf8ceb2/?limit=25#cffb

Will this bug ever be fixed? 00:00 AM and 00:00 PM isn't the norm for the 12 hour clock.

erik.gerrits posted a comment on discussion Engineering 🇬🇧2022-03-22T16:31:09.494000Z2022-03-22T16:31:09.494000Zerik.gerritshttps://forge.codesys.com/u/erik-gerrits/profile/https://forge.codesys.com/forge/talk/Engineering/thread/f093ac8339/?limit=25#3446/c050

Another hidden method. Thank you!

erik.gerrits posted a comment on discussion Visualization 🇬🇧2022-03-22T13:22:28.502000Z2022-03-22T13:22:28.502000Zerik.gerritshttps://forge.codesys.com/u/erik-gerrits/profile/https://forge.codesys.com/forge/talk/Visualization/thread/5f3c847ca2/?limit=25#8af5

If the check mark is selected in the VisualizationManager for "Use CurrentVisu variable". Then you can just write directly to the VisuElems.CurrentVisu variable to change the visualization. Example: IF xGotoPage1 THEN VisuElems.CurrentVisu := 'Page1'; END_IF

erik.gerrits posted a comment on discussion Engineering 🇬🇧2022-03-22T13:17:36.147000Z2022-03-22T13:17:36.147000Zerik.gerritshttps://forge.codesys.com/u/erik-gerrits/profile/https://forge.codesys.com/forge/talk/Engineering/thread/f093ac8339/?limit=25#416a

Does anyone know of a way to change the Node-ID of a CANopen device within the code? I see its possible with the an Ethernet/IP device but it does not appear to be possible with CANopen or with a J1939 ECU as well.