<?xml version="1.0" encoding="utf-8"?>
<feed xml:lang="en" xmlns="http://www.w3.org/2005/Atom"><title>Activity for fraccaroli</title><link href="https://forge.codesys.com/u/fraccaroli/activity/" rel="alternate"/><id>https://forge.codesys.com/u/fraccaroli/activity/</id><updated>2024-03-21T08:30:04.671000Z</updated><subtitle>Recent activity for fraccaroli</subtitle><entry><title>fraccaroli modified a comment on discussion Engineering 🇬🇧</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/dd95c6ba6f/?limit=25#7c52" rel="alternate"/><published>2024-03-21T08:30:04.671000Z</published><updated>2024-03-21T08:30:04.671000Z</updated><author><name>fraccaroli</name><uri>https://forge.codesys.com/u/fraccaroli/profile/</uri></author><id>https://forge.codesys.com/forge/talk/Engineering/thread/dd95c6ba6f/?limit=25#7c52</id><summary type="html">Hello, you probably fixed in this meanwile, but I think your problem comes from dependencies of other libraries. I see in the Project column of errors the "caa types extern" and "caa fb factory", that both have dependencies. Try to check there. Regards, Francesco</summary></entry><entry><title>fraccaroli posted a comment on discussion Engineering 🇬🇧</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/dd95c6ba6f/?limit=25#7c52" rel="alternate"/><published>2024-03-21T08:29:41.907000Z</published><updated>2024-03-21T08:29:41.907000Z</updated><author><name>fraccaroli</name><uri>https://forge.codesys.com/u/fraccaroli/profile/</uri></author><id>https://forge.codesys.com/forge/talk/Engineering/thread/dd95c6ba6f/?limit=25#7c52</id><summary type="html">Hello, you probably fixed in this meanwile, but I think your problem comes from dependencies of other libraries. I see in the Project column of errors the "caa types exten and caa fb factory, that both have dependencies. Try to check there. Regards, Francesco</summary></entry><entry><title>fraccaroli posted a comment on discussion Engineering 🇬🇧</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/98888289cd/?limit=25#bd49" rel="alternate"/><published>2023-02-14T10:08:36.808000Z</published><updated>2023-02-14T10:08:36.808000Z</updated><author><name>fraccaroli</name><uri>https://forge.codesys.com/u/fraccaroli/profile/</uri></author><id>https://forge.codesys.com/forge/talk/Engineering/thread/98888289cd/?limit=25#bd49</id><summary type="html">Hi, what device are you using? There could be manufacturer's libs that do it. As general advice I will use the classical way of embedded system: create a variable and count cycles (assuming that your process is in ciclic task). Another way could be to use the Task configuration &gt; Monitor tab. Hi, Francesco</summary></entry><entry><title>fraccaroli posted a comment on discussion Engineering 🇬🇧</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/52b75fe41b/?limit=25#5552" rel="alternate"/><published>2022-08-05T12:21:11.397000Z</published><updated>2022-08-05T12:21:11.397000Z</updated><author><name>fraccaroli</name><uri>https://forge.codesys.com/u/fraccaroli/profile/</uri></author><id>https://forge.codesys.com/forge/talk/Engineering/thread/52b75fe41b/?limit=25#5552</id><summary type="html">As I expected, no reply. It seems that all SIL2 related question have no answer on this forum. This is very bad for a language used specifically to program safety system. I ask to forum moderator or any one know it if there are some other resources about SIL2 package. If there aren't any other resources, I think that the only other thing to do is to run away from Codesys and pass to a more serious programming language.</summary></entry><entry><title>fraccaroli posted a comment on discussion Engineering 🇬🇧</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/837a5091ff/?limit=25#b71a" rel="alternate"/><published>2022-08-04T15:56:34.461000Z</published><updated>2022-08-04T15:56:34.461000Z</updated><author><name>fraccaroli</name><uri>https://forge.codesys.com/u/fraccaroli/profile/</uri></author><id>https://forge.codesys.com/forge/talk/Engineering/thread/837a5091ff/?limit=25#b71a</id><summary type="html">Hi essii69, did you installed the device package of your device? If you right-click on the project line (in "Devices" sub-window) and you click on "Add device", do you find IFM PLCs? I advise you to start from a template project or an example project from IFM, so the hardware is already configured in the project. Bye. Francesco</summary></entry><entry><title>fraccaroli posted a comment on discussion Engineering 🇬🇧</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/52b75fe41b/?limit=25#2b55" rel="alternate"/><published>2022-08-04T15:19:27.018000Z</published><updated>2022-08-04T15:19:27.018000Z</updated><author><name>fraccaroli</name><uri>https://forge.codesys.com/u/fraccaroli/profile/</uri></author><id>https://forge.codesys.com/forge/talk/Engineering/thread/52b75fe41b/?limit=25#2b55</id><summary type="html">Hi, I ask here a question about the PLCopen specification over Codesys SIL2 package. Reading the Codesys SIL2 user manual I can't understand the worth of the PLCopen specification. I report from the manual: Chapter 1.3: "Aderence to the safety requirements listed in Appendix 7.4 is absolutely necessary." Safety requiment 3-4.5 (from appendix 7.4): "The permitted programming languages for the programming of a Codesys Safety SIL2 controller are listed in chapter 5." Chapter 5 (about programming): "...The...</summary></entry><entry><title>fraccaroli posted a comment on discussion Engineering 🇬🇧</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/f20b049449/?limit=25#8059/b395" rel="alternate"/><published>2022-06-16T07:18:01.912000Z</published><updated>2022-06-16T07:18:01.912000Z</updated><author><name>fraccaroli</name><uri>https://forge.codesys.com/u/fraccaroli/profile/</uri></author><id>https://forge.codesys.com/forge/talk/Engineering/thread/f20b049449/?limit=25#8059/b395</id><summary type="html">Hi Fless, hi i-campbell, I added the warning disable as Fless suggest, but if I use the enum in the project the warning come: [WARNING] INDEX C0125: The constant 2 is assigned to more than one enumeration Compile complete -- 0 errors, 1 warnings I think that the only workaround (without using global constant) is to remove the 'strict' attribute. It seems that CODESYS does not support this way to use array and enums. I was only curious to understand if there were some other way conform with standard...</summary></entry><entry><title>fraccaroli modified a comment on discussion Engineering 🇬🇧</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/f20b049449/?limit=25#acec" rel="alternate"/><published>2022-06-15T15:13:37.697000Z</published><updated>2022-06-15T15:13:37.697000Z</updated><author><name>fraccaroli</name><uri>https://forge.codesys.com/u/fraccaroli/profile/</uri></author><id>https://forge.codesys.com/forge/talk/Engineering/thread/f20b049449/?limit=25#acec</id><summary type="html">Topic: ARRAY idexed by ENUM value Hi all, I'm working with ARRAY indexing and I get some problems. I'm used to work with C and there I define and ENUM with indexes like this: TYPE INDEX : ( ID1, //0 ID2, //1 ID3, //2 NELEM := 3 ); END_TYPE Then I generally declare an ARRAY with "NELEM" as size. In CODESYS is quite difficult, because if I write values : ARRAY [0..INDEX.NELEM] OF INT; the array has 4 elements, not 3. If I write values : ARRAY [1..INDEX.NELEM] OF INT; the array has 3 elements, but INDEX.ID1...</summary></entry><entry><title>fraccaroli modified a comment on discussion Engineering 🇬🇧</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/f20b049449/?limit=25#acec" rel="alternate"/><published>2022-06-15T15:10:53.947000Z</published><updated>2022-06-15T15:10:53.947000Z</updated><author><name>fraccaroli</name><uri>https://forge.codesys.com/u/fraccaroli/profile/</uri></author><id>https://forge.codesys.com/forge/talk/Engineering/thread/f20b049449/?limit=25#acec</id><summary type="html">Topic: ARRAY idexed by ENUM value Hi all, I'm working with ARRAY indexing and I get some problems. I'm used to work with C and there I define and ENUM with indexes like this: TYPE INDEX : ( ID1, //0 ID2, //1 ID3, //2 NELEM := 3 ); END_TYPE Then I generally declare an ARRAY with "NELEM" as size. In CODESYS is quite difficult, because if I write values : ARRAY [0..INDEX.NELEM] OF INT; the array has 4 elements, not 3. If I write values : ARRAY [1..INDEX.NELEM] OF INT; the array has 3 elements, but INDEX.ID1...</summary></entry><entry><title>fraccaroli modified a comment on discussion Engineering 🇬🇧</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/f20b049449/?limit=25#acec" rel="alternate"/><published>2022-06-15T15:07:31.315000Z</published><updated>2022-06-15T15:07:31.315000Z</updated><author><name>fraccaroli</name><uri>https://forge.codesys.com/u/fraccaroli/profile/</uri></author><id>https://forge.codesys.com/forge/talk/Engineering/thread/f20b049449/?limit=25#acec</id><summary type="html">Topic: ARRAY idexed by ENUM value Hi all, I'm working with ARRAY indexing and I get some problems. I'm used to work with C and there I define and ENUM with indexes like this: TYPE INDEX : ( ID1, //0 ID2, //1 ID3, //2 NELEM := 3 ); END_TYPE Then I generally declare an ARRAY with "NELEM" as size. In CODESYS is quite difficult, because if I write values : ARRAY [0..INDEX.NELEM] OF INT; the array has 4 elements, not 3. If I write values : ARRAY [1..INDEX.NELEM] OF INT; the array has 3 elements, but INDEX.ID1...</summary></entry><entry><title>fraccaroli modified a comment on discussion Engineering 🇬🇧</title><link href="https://forge.codesys.com/forge/talk/Engineering/thread/f20b049449/?limit=25#acec" rel="alternate"/><published>2022-06-15T14:59:26.671000Z</published><updated>2022-06-15T14:59:26.671000Z</updated><author><name>fraccaroli</name><uri>https://forge.codesys.com/u/fraccaroli/profile/</uri></author><id>https://forge.codesys.com/forge/talk/Engineering/thread/f20b049449/?limit=25#acec</id><summary type="html">Topic: ARRAY idexed by ENUM value Hi all, I'm working with ARRAY indexing and I get some problems. I'm used to work with C and there I define and ENUM with indexes like this: TYPE INDEX : ( ID1, //0 ID2, //1 ID3, //2 NELEM := 3 ); END_TYPE Then I generally declare an ARRAY with "NELEM" as size. In CODESYS is quite difficult, because if I write values : ARRAY [0..INDEX.NELEM] OF INT; the array has 4 elements, not 3. If I write values : ARRAY [1..INDEX.NELEM] OF INT; the array has 3 elements, but the...</summary></entry></feed>