Activity for leandroct

leandroct modified a comment on discussion Engineering 🇬🇧

2025-09-04T13:07:40.677000Z

I did these steps and it worked: - Copied Application.app and Application.crc to the Folder C:\ProgramData\CODESYS\CODESYSControlWinV3x64\ID_of_CPU\PlcLogic\Application\ copied the visu folder content to the folder C:\ProgramData\CODESYS\CODESYSControlWinV3x64\ID_of_CPU\PlcLogic\Application\visu\ Changed by Notepad the CODESYSControl.cfg at the folder C:\ProgramData\CODESYS\CODESYSControlWinV3x64\ID_ of_CPU\ Where is [CmpApp], adding a line with: Application.1=Application

leandroct modified a comment on discussion Engineering 🇬🇧

2025-09-04T12:58:14.587000Z

I did these steps and it worked: - Copied Application.app and Application.crc to the Folder C:\ProgramData\CODESYS\CODESYSControlWinV3x64\\PlcLogic\Application\ copied the visu folder content to the folder C:\ProgramData\CODESYS\CODESYSControlWinV3x64\\PlcLogic\Application\visu\ Changed by Notepad the CODESYSControl.cfg at the folder C:\ProgramData\CODESYS\CODESYSControlWinV3x64\\ Where is [CmpApp], adding a line with: Application.1=Ap...

leandroct modified a comment on discussion Engineering 🇬🇧

2025-09-04T12:38:44.311000Z

I did this steps and it worked: - Copied Application.app and Application.crc to the Folder C:\ProgramData\CODESYS\CODESYSControlWinV3x64\\PlcLogic\Application\ copied the visu folder content to the folder C:\ProgramData\CODESYS\CODESYSControlWinV3x64\\PlcLogic\Application\visu\ Changed by Notepad the CODESYSControl.cfg at the folder C:\ProgramData\CODESYS\CODESYSControlWinV3x64\\ Where is [CmpApp], adding a line with: Application.1=App...

leandroct modified a comment on discussion Engineering 🇬🇧

2025-09-04T12:37:47.753000Z

leandroct modified a comment on discussion Engineering 🇬🇧

2025-09-04T12:37:15.168000Z

I did this steps and it worked: - Copied Application.app e Application.crc to the Folder C:\ProgramData\CODESYS\CODESYSControlWinV3x64\\PlcLogic\Application\ copied the visu folder content to the folder C:\ProgramData\CODESYS\CODESYSControlWinV3x64\\PlcLogic\Application\visu\ Changed by Notepad the CODESYSControl.cfg at the folder C:\ProgramData\CODESYS\CODESYSControlWinV3x64\\ Where is [CmpApp], adding a line with: Application.1=Appli...

leandroct posted a comment on discussion Engineering 🇬🇧

2025-09-04T12:37:00.632000Z

leandroct posted a comment on discussion Engineering 🇬🇧

2025-09-03T18:30:57.196000Z

I have a Control Win V3.5 SP20 (64-bit) application, and until now, I open the program (with a password) and download it. However, I need to give the client the option to install the program on the Controller, without them having to open it and access the code. So, I followed these steps: 1 – In the Online => Create Boot Application menu, I saved the generated files in a directory: Application.app Application.crc PlcLogic\visu\ directory with several files 2 – In the SysTray, I ran the PLC, and it...

leandroct modified a comment on discussion Runtime 🇬🇧

2024-05-07T14:46:24.060000Z

Since version 19 they changed how file access is handle. There are two solutions: 1. You change where the file is stored (need to go to: /PlcLogic/) 2. You can, if you don´t want to store at PlcLogic, add the following line in the CODESYSControl.cfg under [SysFile]: ForceIecFilePath=0 The CodesysControl.cfg is at C:\ProgramData\CODESYS\CODESYSControlWinV3x64\xxPROJECT_NUMBERxx\ Here the email they sent me: "with the 3.5.19 Version we changed how files are handled. See following issue: CDS-81506 -...

leandroct posted a comment on discussion Runtime 🇬🇧

2024-05-07T14:45:50.248000Z

Since version 19 they changed how file access is handle. There are two solutions: 1. You change where the file is stored (need to go to: /PlcLogic/) 2. You can, if you don´t want to store at PlcLogic, add the following line in the CODESYSControl.cfg under [SysFile]: ForceIecFilePath=0 The CodesysControl.cfg is at C:\ProgramData\CODESYS\CODESYSControlWinV3x64\xxPROJECT_NUMBERxx\ Here the email they sent: "with the 3.5.19 Version we changed how files are handled. See following issue: CDS-81506 - CODESYS...

leandroct posted a comment on discussion Engineering 🇬🇧

2023-08-08T18:09:48.460000Z

Codesys changed the license system (https://store.codesys.com/en/howto_applicationbasedlicenses). How do I know which license package my project will fit into? - I understood that one of the determinants of the package is the size of the application, but where can I see this size? (I put attached a picture with some size information I see). - My application uses 8 cores. I saw a package that says up to 4 cores. How to use 8 cores? - My application has no I/O. It only reads TCP/IP packets from 3 sensors...

leandroct modified a comment on discussion Engineering 🇬🇧

2023-04-17T12:37:28.373000Z

Yes. I configured this Access Control for each POU, but this is only valid for Online. In offline, the user can view and change all the program. For now, I'm putting a password to open the entire program, but I would like that users could view/ change parts of the program.

leandroct posted a comment on discussion Engineering 🇬🇧

2023-04-17T12:34:19.941000Z

Yes. I configured this Access Control for each POU, but this is only valid for Online. In offline, the user can view and change all the program.

leandroct posted a comment on discussion Engineering 🇬🇧

2023-04-11T01:35:48.314000Z

I made an application in Control Win 3.5.SP16. I created users and groups and defined to each POU the permissions (View/ Modify/ Remove) for each group. However, these settings are only valid for the online program. If someone opens my application, they see the entire program. I would like that the offline program also require a user login so that only the permited part of the program appears to the user according to the permissions defined for the user's group. Is this possible?

leandroct posted a comment on ticket #173

2022-11-16T16:52:38.741000Z

Yes. For some reason it lost CodesysControl.cfg I'm doing a backup of it now to be able to restore, but this shouldn´t happen.

leandroct created ticket #173

2022-09-27T16:49:49.717000Z

Unresolved references only in a specific machine with "Control Win"

leandroct posted a comment on discussion Engineering 🇬🇧

2022-03-28T16:56:45.447000Z

I couldn't imagine a logic that would analyze the readings next to the current point, in all 3D directions, without having to convert the sparse matrix into a 3D matrix before processing (only in the region analyzed at the moment). That would solve it, but I'm guessing I'll have processing speed issues. But I will analyze. Thank you again.

leandroct posted a comment on discussion Engineering 🇬🇧

2022-03-28T16:38:53.619000Z

Thanks to all by the answers. - I use 64 bits Codesys. - I saw the Target memory settings that you said, sgronchi. Thanks! But really it can’t reach my needed memory even if I increase my PC memory, if I understood. - To explain about why I want this big array, my application does a 3D reading of an area with size x(600cm), y(3000cm) and z(650cm). To create a logic that navigate in the space to analyze the objects and surfaces is very hard to me unless I could put the read points in a 3D array. In...

leandroct modified a comment on discussion Engineering 🇬🇧

2022-03-25T20:45:36.683000Z

I use Codesys Control Win MC 3.5 SP16 and I created in my existing application two new arrays of [600,3000,650] OF BOOL. When I try to download the application, it shows up an error message "Out of global data memory. I tried clean all and retried the download with no sucess and I deleted persistent varibales too. Is there a way to increase the memory? My PC has 16Gb of memory and it has memory available. Where I can access the configuration to chance this? Thanks!

leandroct posted a comment on discussion Engineering 🇬🇧

2022-03-25T20:44:03.942000Z

I use Codesys Control Win MC 3.5 SP16 and I created in my existing application two new arrays of [600,3000,650] OF BOOL. When I try to download the application, if shows up an error message "Out of global data memory. I tried clean all and retried the download with no sucess and I deleted persistent varibales too. Is there a way to increase the memory? My PC has 16Gb of memory and it has memory available. Where I can access the configuration to chance this? Thanks!

leandroct modified a comment on discussion Engineering 🇬🇧

2020-12-10T17:11:22.079000Z

There is a recurring time-out log in my Control Win application (CmpSupervisor Component log) that I wanted to understand in the log information to try to identify which POU and CPU is causing the problem (Sometimes my ControlWin stops and maybe it is because of this): [2] Operation: CmpID = 0x00000019, ID = 0x1, enable = 1, alive = 0, timeout = 10000 [FAILED] So: - What does this "[2]" mean? - What does "CmpID = 0x00000019" mean? - What does "ID = 0x1" mean? - What is "enabled = 1"? (Can it be disabled?)...

leandroct modified a comment on discussion Engineering 🇬🇧

2020-12-10T15:30:50.069000Z

leandroct modified a comment on discussion Engineering 🇬🇧

2020-12-10T15:24:56.348000Z

leandroct modified a comment on discussion Engineering 🇬🇧

2020-12-10T15:23:07.439000Z

leandroct modified a comment on discussion Engineering 🇬🇧

2020-12-10T15:21:21.360000Z

leandroct posted a comment on discussion Engineering 🇬🇧

2020-12-10T15:18:10.120000Z

leandroct modified a comment on discussion Engineering 🇬🇧

2020-10-09T14:12:28.246000Z

leandroct posted a comment on discussion Engineering 🇬🇧

2020-10-09T14:12:13.198000Z

I started to develop in 32 bits because I was using a 32 bits embedded PC. After that, my application started to run in a virtual machine in a big Xeon server. Then, I tried to change my program to 64 bits but several functionalities stopped to work with unexplained exceptions too (I don't remember what was the problems). I was losing too much time with it, then I gave up trying. So, if there is anything to do to rise up the Control Win memory possibility, I would appreciate very much! Thanks!

leandroct posted a comment on discussion Engineering 🇬🇧

2020-10-09T14:11:09.683000Z

I had tried the "Clear All" in the menu, I had tried to delete the project directory manually and it not worked. The only way I got it was the redo the changes in an older program.

leandroct posted a comment on discussion Engineering 🇬🇧

2020-10-09T14:06:12.311000Z

leandroct posted a comment on discussion Engineering 🇬🇧

2020-10-08T12:48:35.734000Z

I solved it, but I don't know the cause of the problem. I have the older version of my program. I made all changes again, by control-c/ control-v from the newer version to the older, and it worked. Thanks!

leandroct posted a comment on discussion Engineering 🇬🇧

2020-10-08T12:13:55.597000Z

What do you mean? I have some Vars defined as retain persistent, but it's a few bits e few values. Do you mean a kind of bug that I cannot use this kind of variable?

leandroct posted a comment on discussion Engineering 🇬🇧

2020-10-08T02:01:13.944000Z

I'm trying to download my program (Control Win MC 3.5.16.10) and Codesys says that: "Download failed: Not enough memory on device". The available memory of my PC is bigger than the program size. Is that a limitation of the Control Win? Why I'm having this problem?