Activity for mini-developer

Activity for mini-developerhttps://forge.codesys.com/u/mini-developer/activity/2024-10-16T08:51:22.275000ZRecent activity for mini-developermini-developer posted a comment on discussion Engineering 🇬🇧2024-10-16T08:51:22.275000Z2024-10-16T08:51:22.275000Zmini-developerhttps://forge.codesys.com/u/mini-developer/profile/https://forge.codesys.com/forge/talk/Engineering/thread/0c8a683e85/?limit=25#d793

Hello, I have a Exor HMI with 2 seperatred ETH interface's. It is Configured as PN Master on ETH interface 1 and the IO's are working, as long as the development PC is connected to the ETH 0 interface. When the PC is disconnected, the PN communication drops and a reconnection is started. I installed the newest device description for Codesys and Firmware for the Panel. The IO Gateway is from Weidmueller What could cause the Problem?

mini-developer modified a comment on discussion Engineering 🇬🇧2024-10-16T08:34:10.167000Z2024-10-16T08:34:10.167000Zmini-developerhttps://forge.codesys.com/u/mini-developer/profile/https://forge.codesys.com/forge/talk/Engineering/thread/5b6c16b524/?limit=25#9c84

When the PC is connected on the other ETH-Port there is no Problem.

mini-developer posted a comment on discussion Engineering 🇬🇧2024-10-16T08:32:39.758000Z2024-10-16T08:32:39.758000Zmini-developerhttps://forge.codesys.com/u/mini-developer/profile/https://forge.codesys.com/forge/talk/Engineering/thread/5b6c16b524/?limit=25#9c84

Hello, I have this Problem when i disconnect the PC from another ETH-Port. Did you solve the Problem?

mini-developer posted a comment on discussion Engineering 🇬🇧2024-10-16T08:32:33.218000Z2024-10-16T08:32:33.218000Zmini-developerhttps://forge.codesys.com/u/mini-developer/profile/https://forge.codesys.com/forge/talk/Engineering/thread/5b6c16b524/?limit=25#e743

Hello, I have this Problem when i disconnect the PC from another ETH-Port. Did you solve the Problem?

mini-developer posted a comment on discussion Engineering 🇬🇧2024-08-23T05:33:20.825000Z2024-08-23T05:33:20.825000Zmini-developerhttps://forge.codesys.com/u/mini-developer/profile/https://forge.codesys.com/forge/talk/Engineering/thread/7d7bf14912/?limit=25#c41a

Hello, I use the Library NBS from "caa net base services". After opening the Project i get 19 errors from the message window "Precompilation", most of them because it doesn't recognise a component of the FB "NBS.UD_Peer". (see photo) After compiling the Project at least 2 times, there are no errors. Is there a reason and solution for this behavior? Is there a problem with resolving the library? Thanks for any clue