Activity for nickpoonhttps://forge.codesys.com/u/nickpoon/activity/2026-02-02T23:06:43.818000ZRecent activity for nickpoonnickpoon modified a comment on discussion Engineering 🇬🇧2026-02-02T23:06:43.818000Z2026-02-02T23:06:43.818000Znickpoonhttps://forge.codesys.com/u/nickpoon/profile/https://forge.codesys.com/forge/talk/Engineering/thread/ce10989980/?limit=25#1941I'm going through the process of updating the CODESYS Project a machine to 3.5 SP21 (old version was 3.5 SP20). One function that stopped working when upgrading was SysProcessCreate. I need to run a .exe file that is located in C:\Program Files\MQTTStream. Some initial searching suggested that there are new security rules that prevent the SoftPLC from reading/writing files to outside of its Device folder (located here - C:\Windows\System32\config\systemprofile\AppData\Roaming\CODESYS\CODESYSControlWinV3x64\24FD6770)...nickpoon posted a comment on discussion Engineering 🇬🇧2026-02-02T23:06:24.078000Z2026-02-02T23:06:24.078000Znickpoonhttps://forge.codesys.com/u/nickpoon/profile/https://forge.codesys.com/forge/talk/Engineering/thread/ce10989980/?limit=25#1941I'm going through the process of updating the CODESYS Project a machine to 3.5 SP21 (old version was 3.5 SP20). One function that stopped working when upgrading was SysProcessCreate. I need to run a .exe file that is located in C:\Program Files\MQTTStream. Some initial searching suggested that there are new security rules that prevent the SoftPLC from reading/writing files to outside of its Device folder (located here - C:\Windows\System32\config\systemprofile\AppData\Roaming\CODESYS\CODESYSControlWinV3x64\24FD6770)...