Activity for stlim

Activity for stlimhttps://forge.codesys.com/u/stlim/activity/2022-06-03T05:46:47.642000ZRecent activity for stlimstlim posted a comment on discussion Engineering 🇬🇧2022-06-03T05:46:47.642000Z2022-06-03T05:46:47.642000Zstlimhttps://forge.codesys.com/u/stlim/profile/https://forge.codesys.com/forge/talk/Engineering/thread/5ac57f5152/?limit=25#a8e9

Problem solved! I found the solution. I changed the serial connection from GPIO to USB serial convertor on Raspberry pi it works. I added these in Raspberry sudo nano /etc/CODESYSControl.cfg [SysCom] Linux.Devicefile.2=/dev/ttyUSB0 Linux.Devicefile.1=/dev/ttyS0

stlim posted a comment on discussion Engineering 🇬🇧2022-06-01T08:47:12.399000Z2022-06-01T08:47:12.399000Zstlimhttps://forge.codesys.com/u/stlim/profile/https://forge.codesys.com/forge/talk/Engineering/thread/5ac57f5152/?limit=25#c6e8

Hello Edwin Schwellinger, I found problem in serial communication as below. I would be very appreciated if you can raise these problem on Jira. 1. SysCom, 3.5.17.0, setting is as below. COM_RS232C.sPort:=SysCOM.SYS_COMPORT1; COM_RS232C.byParity:=SysCOM.SYS_EVENPARITY; COM_RS232C.byStopBits:=SysCOM.SYS_ONESTOPBIT; COM_RS232C.ulBaudrate:=SysCOM.SYS_BR_115200; COM_RS232C.ulBufferSize:=50; COM_RS232C.ulTimeout:=0; COM_RS232CEx.byByteSize:=8; When I sent data via SysCom.SysComWrite to PC, it read data...