Hello Prof. Patel,

thank you for your response and the good news J.

I wish you a good a success with the lecture.

Best regards

Roland Wagner

CODESYS Group
We software Automation.

---

CODESYS GmbH
A member of the CODESYS Group

Dipl.-Ing. (FH) Roland Wagner | Head of Product Marketing
Memminger Str. 151 | 87439 Kempten | Germany
Tel. +49-831-54031-17
r.wagner@codesys.com | codesys.com

CODESYS Store: store.codesys.com
CODESYS Talk: talk.codesys.com
CODESYS Online Help: help.codesys.com

Geschäftsführer / CEOs: Dipl.-Inf. Dieter Hess, Dipl.-Inf. Manfred Werner
Handelsregister / Trade register: Kempten HRB 6186 | USt-IDNr. / Tax ID No.: DE 167014915

---

Diese E-Mail enthält möglicherweise vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind
oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail.
Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received
this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure
or distribution of the material in this e-mail is strictly forbidden.

Von: Mohan Patel <mohan.patel@ppsu.ac.in>
Gesendet: Mittwoch, 29. Dezember 2021 11:20
An: [forge:talk] <Engineering@talk.forge.forge.codesys.com>; Roland Wagner <r.wagner@codesys.com>
Betreff: Re: [forge:talk] unable to connect Raspberry Pi with Codesys

Thank you for your kind support, 

I succeeded for configuring Raspberry pi 3b+, I used codesys control for raspberry pi 4.2.0.0

Codesys V3.5 V17.10 SP 1  - 32 bit system, also installed Codesys edge gateway. I enabled  all interfaces in OS. and things got workout.

Thank you for your kind support.

I am going to start engineering student training from Saturday 1st JAN2021.

I will share details of 

Progess.

On Wed 29 Dec, 2021, 1:16 AM eschwellinger, <no-reply@codesys.com> wrote:

I would use the Gateway on the PI - to scan the plc. ( You have been asked on deploying the runtime if you want to install the EdgeGateway too9
Add new Gateway with the IP address of your PI and scan the plc that way.

---

unable to connect Raspberry Pi with Codesys

---

Sent from forge.codesys.com because you indicated interest in https://forge.codesys.com/forge/talk/Engineering/

To unsubscribe from further messages, please visit https://forge.codesys.com/auth/subscriptions/