Startpage
CODESYS Talk
-
Wold posted a comment on discussion Runtime 🇬🇧
Hello, I am running a CODESYS Control Runtime on a Raspberry Pi. Two CmSticks are connected to the same system: CmStick A - Runtime license - MultiCore license - KNX license CmStick B - Engineering / Developer licenses My goal is: The runtime on the Raspberry Pi shall use CmStick A locally. Licenses from CmStick A shall NOT be provided by the CodeMeter Network Server. Only licenses from CmStick B shall be available to remote network clients. During troubleshooting I observed that the CodeMeter Network...
-
thomas-k posted a comment on discussion Deutsch 🇩🇪
SysTimeRtc.SysTimeRtcHighResGet(pTimestamp := lstActualIPCUnixTime_ms); SysTimeRtc. SysTimeRtcConvertHighResToLocal(lstActualIPCUnixTime_ms,lstActualIPCUnixTimeLocal_ms); SysTimeRtc.SysTimeRtcConvertLocalToHighRes(lstActualIPCUnixTimeLocal_ms,lstActualTime_ms); F30_SysTimeRtcHighResGetLocal:= TO_ULINT(lstActualTime_ms); Dies hat immer die selbe Zeit in UTC. Wie bekomme ich eine HIGHRes Zeit in Millisekunden. Und diese Zeit nicht in UTC sondern mit der Zeitzone verrechnet..... Und reicht es die Zeitzone...
-
thomas-k posted a comment on discussion Deutsch 🇩🇪
SysTimeRtc.SysTimeRtcHighResGet(pTimestamp := lstActualIPCUnixTime_ms); SysTimeRtc. SysTimeRtcConvertHighResToLocal(lstActualIPCUnixTime_ms,lstActualIPCUnixTimeLocal_ms); SysTimeRtc.SysTimeRtcConvertLocalToHighRes(lstActualIPCUnixTimeLocal_ms,lstActualTime_ms); F30_SysTimeRtcHighResGetLocal:= TO_ULINT(lstActualTime_ms); Dies hat immer die selbe Zeit in UTC. Wie bekomme ich eine HIGHRes Zeit in Millisekunden. Und diese Zeit nicht in UTC sondern mit der Zeitzone verrechnet..... Und reicht es die Zeitzone...
-
aniket-b posted a comment on discussion Engineering 🇬🇧
I found this issue raised multiple times but I do not find a solution for this. I am getting Configure encapsulation Layer on EIP product while using with CODESYS V3.5 SP22. This product works well with Rockwell, Omron, Mithshibishi PLCs. The same device, same eds file, same EIP configuration does not work with CODESYS. Can someone please guide me here?
-
somlioy posted a comment on discussion Engineering 🇬🇧
Solved. Had to explicitly select English inside CODESYS as language instead of system default, which for my case is norwegian... Open Tools → Options → International Settings Set the development-system language to English Restart codesys