Post by fajean on CODESYS control on RPi starts, shortly runs, then exits
CODESYS Forge
talk
(Post)
I have a Raspberry Pi 4 we have been using for years to run CODESYS for development purposes. I recently have had to re-install the OS (Raspberry OS lite). The only change to the default configuration is not creating the "pi" user during install. I (apparently successfully) installed the 4.10.0.0 control on the Raspberry Pi. We have licences on a dongle. I am able to start the control. systemctl status shows it as running for a little while (exactly, precisely 30 seconds as per my tests, every time), then it becomes exited. I can restart the control, and the same thing happens again. Every time. In the brief moments it is running, I can log in to the PLC. Working fast and restarting the control many times, I have been able to configure users. I have been able to download my application. I have been able to run the application, and stop on a breakpoint. I have been able to connect with the licence manager and confirm the dongle is detected and licences are listed as OK. I see nothing wrong until the service just exits. I have found nothing in the logs. It is like the runtime just terminates with no error code or message after exactly 30 seconds. Any help would be appreciated.
Last updated: 2024-06-13
Home (version 1) discussion
greenwood
wiki
(Thread)
Home (version 1) discussion
Last updated: 2024-06-13
wiki Discussion
alexs
wiki
(Discussion)
Forum for wiki comments
Last updated: 2024-06-13
(no subject)
alexs
wiki
(Thread)
Last updated: 2024-06-13
Home
alexs
wiki
(WikiPage)
Project Members: alexs (admin)
Last updated: 2024-06-13
Post by installwhat on Panasonic servo Softmotion project
CODESYS Forge
talk
(Post)
There are examples installed when you install codesys. they are located in C:\Program Files\CODESYS 3.5.19.50\CODESYS\CODESYS SoftMotion\Examples The examples won't be specific to your drive, though you haven't specified the exact drive. After you add the device to the ethercat master you can click on it and set pdo etc
Last updated: 2024-06-13
Post by andreag0 on How to access to variable value through symbolic string name
CODESYS Forge
talk
(Post)
No
Last updated: 2024-06-13
Panasonic servo Softmotion project
CODESYS Forge
talk
(Thread)
Panasonic servo Softmotion project
Last updated: 2024-06-13
Post by installwhat on How to access to variable value through symbolic string name
CODESYS Forge
talk
(Post)
Maybe your question makes sense but I don't see it. Maybe you should rephrase and add a lot of detail
Last updated: 2024-06-13
Post by installwhat on How to access to variable value through symbolic string name
CODESYS Forge
talk
(Post)
https://help.codesys.com/api-content/2/codesys/3.5.12.0/en/_cds_operator_string_to/ Something like this?
Last updated: 2024-06-13
Post by installwhat on How to access to variable value through symbolic string name
CODESYS Forge
talk
(Post)
https://help.codesys.com/api-content/2/codesys/3.5.12.0/en/_cds_operator_string_to/ Something like this?
Last updated: 2024-06-13
Post by brubingh on Download Missing Libraries not working
CODESYS Forge
talk
(Post)
We are working on a project and the customer required 3.5.16 BF4. After working on the project for a few weeks I opened it the next morning and it could not access libraries. IecVarAccess could not be accessed. I checked if windows updated - it did not. So no explanation for why it lost access other than that I shut down the computer for the night. Note that I am using a demo license. I still haven't figured out any reason to purchase a license. So I spent the next hour reinstalling CodeSys. Note that I did NOT uninstall first. After install I waited another 5 minutes for it to open the first time. I clicked File->Open to open the project. Previously I had selected File->Recent Projects - not sure if that makes and difference. But after this process it did open the project and compile it just fine. This is miserable. If this had happened when I went on site to a customer I would have lost hours of work doing the reinstall. Is there a different and quicker fix?
Last updated: 2024-06-13
Download Missing Libraries not working
CODESYS Forge
talk
(Thread)
Download Missing Libraries not working
Last updated: 2024-06-13
wiki Discussion
brubingh
wiki
(Discussion)
Forum for wiki comments
Last updated: 2024-06-13
blog Discussion
brubingh
blog
(Discussion)
Forum for blog comments
Last updated: 2024-06-13
(no subject)
brubingh
wiki
(Thread)
Last updated: 2024-06-13
Home
brubingh
wiki
(WikiPage)
Project Members: brubingh (admin)
Last updated: 2024-06-13
Post by fajean on CODESYS control on RPi starts, shortly runs, then exits
CODESYS Forge
talk
(Post)
4.11 appears to solve the problem. Thanks for your help. I had first installed the 64-bit version of RPiOS, but looking at various posts and the product's page on the store which only lists 32-bit compatibility, I downgraded to the 32-bit version. I did this before trying 4.11, and it did not solve the problem. Thus my working system is 32-bit, and I am wondering if I can go back to 64-bit or not. An 64-bit OS is not listed as compatible on the store's web page, but when installing there actually is a 64-bit version listed (automatically chosen when installing on 64-bit, but otherwise greyed out). Is 64-bit supported and the website is out-of-date, or is that some kind of work-in-progress?
Last updated: 2024-06-13
Scripting - how to get the fixed compiler version from Project settings
CODESYS Forge
talk
(Thread)
Scripting - how to get the fixed compiler version from Project settings
Last updated: 2024-06-13
Modbus tcp - channel
CODESYS Forge
talk
(Thread)
Modbus tcp - channel
Last updated: 2024-06-13
Home (version 1) discussion
paulg
wiki
(Thread)
Home (version 1) discussion
Last updated: 2024-06-13
Post by gatto on Modbus tcp - channel
CODESYS Forge
talk
(Post)
Hi can you give more details? Are you talking about a danfoss? wich model? Can post the configuration of channel' I used, on the past, serial modbus with danfoss fc280 I remember ((id x 10)-1) I remember that you couldn't use continuous reading/writing of the directors but you had to use them one at a time. it seemed that reading empty registers (caused by x10) was not accepted by danfoss. So I had created a scan that used just one register, then the next etc etc with a timed interval. But this was for the serial, I don't know if it's the same thing with ethernet. I currently use Ethernet TCP/IP interface with FC280.
Last updated: 2024-06-13
Post by lmartin on Scripting - how to get the fixed compiler version from Project settings
CODESYS Forge
talk
(Post)
Hi I search the way to be able to get the fixed version of the compiler set in the Project settings via a python script. Anabody know how to do that?
Last updated: 2024-06-13
Post by eschwellinger on CODESYS control on RPi starts, shortly runs, then exits
CODESYS Forge
talk
(Post)
if you use Bookworm uodate to 4.11.0.0 version please.
Last updated: 2024-06-13
Post by fajean on CODESYS control on RPi starts, shortly runs, then exits
CODESYS Forge
talk
(Post)
https://us.store.codesys.com/codesys-control-for-raspberry-pi-sl.html Quoted from the "additional requirements" section : The operating system Raspberry Pi OS (32-bit)
Last updated: 2024-06-14