(no subject)
nguyenkhoi
wiki
(Thread)
Last updated: 2023-08-31
Post by hwillems on Ranges, Lambdas, on Fixed arrays of structs
CODESYS Forge
talk
(Post)
I do datastructures and algorithms in Codesys. For example a Struct of Person with thing's like IdNumber, Name, Age etc. as example. Now i do all kind of calculations, filters. So i have this pretty big Fixed Array with Structs. On this struct i want to do simple stuff you can do easily in C++/Python/Rust etc. For example i want to do this: AvererageAge := Average(Peoples.Age); Then it will return the average of all members ages. Or Sort struct on age etc. Or sort on alphabetical Name. Or use Lambda functions to filter/mutate out things like, filter out everybody above 18 years old. Or remove people who it's name start with "A". Currently i have to write my own custom function for example sorting on Age. And make a super specific function based on that particulare datastructure. Here an Example: (*Before calling this FIlter method, set the mNodeFilterSwitch to the desired filter.*) CASE mNodeFilterSelect OF (********************************[ Status Filters ]***********************************) NodeID: FOR x := ACS_OUT_BEGIN TO ACS_OUT_END BY 1 DO FOR y := ACS_IN_BEGIN TO ACS_IN_END BY 1 DO IF marrNode[y].Status.oiNodeID > marrNode[y + 1].Status.oiNodeID THEN mNodeTemp := marrNode[y + 1]; marrNode[y + 1] := marrNode[y]; marrNode[y] := mNodeTemp; END_IF; END_FOR; END_FOR; Started: FOR x := DES_OUT_BEGIN TO DES_OUT_END BY -1 DO FOR y := DES_IN_BEGIN TO DES_IN_END BY -1 DO IF marrNode[y].Status.oxStarted > marrNode[y - 1].Status.oxStarted THEN mNodeTemp := marrNode[y - 1]; marrNode[y - 1] := marrNode[y]; marrNode[y] := mNodeTemp; END_IF; END_FOR; END_FOR; Starting: FOR x := DES_OUT_BEGIN TO DES_OUT_END BY -1 DO FOR y := DES_IN_BEGIN TO DES_IN_END BY -1 DO IF marrNode[y].Status.oxStarting > marrNode[y - 1].Status.oxStarting THEN mNodeTemp := marrNode[y - 1]; marrNode[y - 1] := marrNode[y]; marrNode[y] := mNodeTemp; END_IF; END_FOR; END_FOR; END_CASE; I have like 30+ of these in the enum. Not really DRY code right? These are custom made bubble sort filters in a function. You pass in the Datastructure, and say what function you want. (This is an enum collection of sorting functions) And then the Array with Nodes of Structs gets ordered. Why can't we have Iterators and Lambda's and build in standard functions like regular languages? Also i use bubble sort because it's the easiest to implement because i can't get this to code DRY. Problem with ST (Even the new one with classes) that it's very limited for programming datastructures and algorithms. Yes you still not want dynamic memory and you need to choose the correct algorithm so you know the most extreme edge cases regarding the time it takes to execute the algorithms.(Real-time execution) How are other people dealing with this? Here for example saw some software using an adjusted ST language and having FOR EACH possibility: https://www.fernhillsoftware.com/help/iec-61131/structured-text/st-for-each.html You can then build your own custom Iterator functions. I wish the IEC 61131-3 standard would be more expressive and having more standard modern features, but still keep close to the fact of no dynamics memory and real-time systems.
Last updated: 2023-08-31
Home
c9301079
wiki
(WikiPage)
This is the personal project of c9301079. This project is created automatically during user registration as an easy place to store personal data that doesn't need its own project such as cloned repositories.
Last updated: 2023-08-31
wiki Discussion
c9301079
wiki
(Discussion)
Forum for wiki comments
Last updated: 2023-08-31
blog Discussion
c9301079
blog
(Discussion)
Forum for blog comments
Last updated: 2023-08-31
(no subject)
c9301079
wiki
(Thread)
Last updated: 2023-08-31
Post by timvh on eCockpit - unable to start simulation
CODESYS Forge
talk
(Post)
You need to start the application, see the "start" option at the top left (next to close simulation).
Last updated: 2023-08-31
gateway problem
CODESYS Forge
talk
(Thread)
gateway problem
Last updated: 2023-08-31
Post by felipemsgarcia on EtherCAT - Force Control Word
CODESYS Forge
talk
(Post)
What worked for me: Use SMC_SetControllerMode and set the nControllerMode to SMC_nocontrol. With that, you can control the drive via Modes of Operation(16#6060) and Controlword(16#6040) directly. Hope that helps, Cheers!
Last updated: 2023-08-31
Post by timvh on gateway problem
CODESYS Forge
talk
(Post)
Maybe select the local gateway instead of the gateway on the remote device?
Last updated: 2023-08-31
EtherCAT - Force Control Word
CODESYS Forge
talk
(Thread)
EtherCAT - Force Control Word
Last updated: 2023-08-31
wiki Discussion
garyl
wiki
(Discussion)
Forum for wiki comments
Last updated: 2023-08-31
blog Discussion
garyl
blog
(Discussion)
Forum for blog comments
Last updated: 2023-08-31
(no subject)
garyl
wiki
(Thread)
Last updated: 2023-08-31
Comments in arrays and assigning RST coil's to 600 outputs
CODESYS Forge
talk
(Thread)
Comments in arrays and assigning RST coil's to 600 outputs
Last updated: 2023-08-31
Post by garyl on Comments in arrays and assigning RST coil's to 600 outputs
CODESYS Forge
talk
(Post)
Hello all, im working on a project that requires me to convert an old automation direct DirectSoft PLC d2-250-1. One of the problems im encountering is that all of the comments are attached to members of the different addresses. When i convert the addresses (1777 "C" registers, 777 X registers, and 20,0000 V registers) im running into difficulties keeping the inputs/outputs correct since they are missing documentation. Is there a good way to retain the comments of the indexes in the array? Secondly, initially i was declaring the "C" and "V" addresses individually and this worked to retain the comments as to which register did what, however i ran into a problem when one rung reset (or set to 0) approximately 600 C Addresses. Since each tag is separately declared this proved to be nearly impossible without a literal wall of code that attempted to crash the program. So i converted all of the registers (C,X,Y,V) into separate structs, declared them as arrays and pointed all of the original call outs in the program to the newly defined structs. However i have now lost comments and the program is very hard to follow. Thanks for any help with this issue.
Last updated: 2023-08-31
Home
garyl
wiki
(WikiPage)
This is the personal project of garyl. This project is created automatically during user registration as an easy place to store personal data that doesn't need its own project such as cloned repositories.
Last updated: 2023-08-31
home Discussion
mySampleProject
home
(Discussion)
Forum for home comments
Last updated: 2023-08-31
(no subject)
mySampleProject
home
(Thread)
Last updated: 2023-08-31
code Discussion
mySampleProject
code
(Discussion)
Forum for code comments
Last updated: 2023-08-31
Home
mySampleProject
home
(WikiPage)
Project Members: tanman19 (admin)
Last updated: 2023-08-31
Symbol Configuration, I'm doing it wrong
CODESYS Forge
talk
(Thread)
Symbol Configuration, I'm doing it wrong
Last updated: 2023-08-31
mySampleProject SVN repository
mySampleProject
code
(SVN Repository)
Last updated: 2023-08-31
Post by ellcap on Symbol Configuration, I'm doing it wrong
CODESYS Forge
talk
(Post)
if you're here because you are making the same mistake as me, I just resolved it. I mistakenly thought I didn't need to write the word attribute in the column labeled attribute. changed this 'symbol' := 'read' to this attribute 'symbol' := 'read' The last two in this clip are still wrong: I recongize this is probably a big "duh". That's ok. I like to fail out loud in hopes it helps someone else from looking silly.
Last updated: 2023-08-31
Post by tvm on Ranges, Lambdas, on Fixed arrays of structs
CODESYS Forge
talk
(Post)
Have you looked at this? https://forge.codesys.com/prj/codesys-example/element-collect/home/Home/ It's not exactly what you're looking for, but I've been able to make some things work more efficiently using this library.
Last updated: 2023-08-31