Raspberry Pi: List of available drivers / libraries
CODESYS Forge
talk
(Thread)
Raspberry Pi: List of available drivers / libraries
Last updated: 2025-03-15
Home (version 1) discussion
lordsteve
wiki
(Thread)
Home (version 1) discussion
Last updated: 2025-03-15
Post by trusty-squire on Codesys for raspberry pi 5 not working exactly
CODESYS Forge
talk
(Post)
Not sure if you've resolved this yet, but the Codesys runtime user/password is different than the Linux user/password. You'll need the Linux user credentials when you log in over SSH (for example, to install the Codesys runtime). When you first log in to Codesys on the RaspPi you'll set up a Codesys user and password. If you lost those credentials, you could try uninstalling and then re-installing the Codesys runtime on the RaspPi so you can setup a new user/password.
Last updated: 2025-03-16
Codesys for raspberry pi 5 not working exactly
CODESYS Forge
talk
(Thread)
Codesys for raspberry pi 5 not working exactly
Last updated: 2025-03-16
Post by trusty-squire on Codesys Licenses - How to reload them after updating the Raspberry Pi OS
CODESYS Forge
talk
(Post)
Last updated: 2025-03-16
Codesys Licenses - How to reload them after updating the Raspberry Pi OS
CODESYS Forge
talk
(Thread)
Codesys Licenses - How to reload them after updating the Raspberry Pi OS
Last updated: 2025-03-16
screenshoots Discussion
(Sys)Com-Wrapper
screenshoots
(Discussion)
Forum for screenshoots comments
Last updated: 2025-03-16
Post by trusty-squire on Codesys Licenses - How to reload them after updating the Raspberry Pi OS
CODESYS Forge
talk
(Post)
https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_cmd_license_manager.html Search the help page above for "Return License". Should be what you're looking for.
Last updated: 2025-03-16
wiki Discussion
artplc
wiki
(Discussion)
Forum for wiki comments
Last updated: 2025-03-16
blog Discussion
artplc
blog
(Discussion)
Forum for blog comments
Last updated: 2025-03-16
(no subject)
artplc
wiki
(Thread)
Last updated: 2025-03-16
Home
artplc
wiki
(WikiPage)
Project Members: artplc (admin)
Last updated: 2025-03-16
Post by trusty-squire on SysProcessCreate2 on Linux runtime
CODESYS Forge
talk
(Post)
Hi, I'm trying to launch a continuously running python script from Codesys and monitor the script status inside the Codesys runtime (running on a Linux enviroment). For now I'm testing with the below to emulate a continuously running Python script: #test.py i = 0 while True: i += 1 I'm able to successfully run the script using SysProcessExecuteCommand2 (I can see the Python process running in the task manager). However, this "freezes" the Codesys execution of the task - it sits on that command and will not continue until the Python script ends. I've proven this works by using the task monitor to kill the process, then Codesys continues on happily through the task. What I want to do is use SysProcessCreate2 to set up the Python script as a background task and monitor the process using SysProcessGetState. This always results in the error "ERR_OPERATION_DENIED". I know that I'm able to execute commands (as above), so my config should be correct. Is SysProcessCreate2 functional on a Linux environment? Is there something in the config file I'm missing? Here's my "working" code that uses SysProcessExecuteCommand2: VAR bTest : BOOL; sCommand : STRING := '/usr/bin/python3 /var/opt/codesys/PlcLogic/Application/test.py'; refCommand : REFERENCE TO STRING REF= sCommand; sOutput : STRING; refOutput : REFERENCE TO STRING REF= sOutput; result : RTS_IEC_RESULT; END_VAR IF bTest THEN SysProcessExecuteCommand2( pszCommand:= refCommand, pszStdOut:= refOutput, udiStdOutLen:= SIZEOF(sOutput), pResult:= ADR(result) ); bTest:= FALSE; END_IF And here's the code that always results in the ERR_OPERATION_DENIED error: VAR bTest : BOOL; sApp : STRING := '/usr/bin/python3'; sCommand : STRING := '/var/opt/codesys/PlcLogic/Application/test.py'; refApp : REFERENCE TO STRING REF= sApp; refCommand : REFERENCE TO STRING REF= sCommand; hResult : SysProcess.RTS_IEC_RESULT; hHandle : SysProcess.RTS_IEC_HANDLE; END_VAR IF bTest THEN hHandle := SysProcessCreate2( pszApplication:= refApp, pszCommandLine:= refCommand, ulFlags:=SYSPROCESS_CREATEFLAG_HIDDEN, pResult:= ADR(hResult) ); bTest:= FALSE; END_IF Here's the relevant section from the config file at /etc/codesyscontrol/CODESYSControl.cfg: [SysProcess] Command=AllowAll Appreciate any support or ideas. Thanks!
Last updated: 2025-03-16
Post by pistola on How to change font and font color rectangle/or related object
CODESYS Forge
talk
(Post)
Here is the help sections for visual elements rectangle. https://content.helpme-codesys.com/en/CODESYS%20Visualization/_visu_elem_rectangle.html Under "Font Variable" there is "Color" which is a Dword, you can make a variable that changes colour within your code to the color needed. Note the format for the Dword variable is: colorVariable := 16#TTRRGGBB Where: TT = Transparency 00-FF RE = Red 00-FF GG = Green 00-FF BB = Blue 00-FF https://content.helpme-codesys.com/en/CODESYS%20Visualization/_visu_animate_color.html
Last updated: 2025-03-17
How to change font and font color rectangle/or related object
CODESYS Forge
talk
(Thread)
How to change font and font color rectangle/or related object
Last updated: 2025-03-17
wiki Discussion
hassaank
wiki
(Discussion)
Forum for wiki comments
Last updated: 2025-03-17
blog Discussion
hassaank
blog
(Discussion)
Forum for blog comments
Last updated: 2025-03-17
(no subject)
hassaank
wiki
(Thread)
Last updated: 2025-03-17
Post by hassaank on CODESYS V3+ WAGO PFC200+ MODBUS RTU
CODESYS Forge
talk
(Post)
Hi everyone, I’m new to CODESYS and Wago devices, and I’m trying to set up Modbus RTU communication. I have a Wago PFC200 (8110) and a 750-653 RS485 module, and I want to read data from an energy meter using Modbus RTU. Thanks in advance for your help!
Last updated: 2025-03-17
CODESYS V3+ WAGO PFC200+ MODBUS RTU
CODESYS Forge
talk
(Thread)
CODESYS V3+ WAGO PFC200+ MODBUS RTU
Last updated: 2025-03-17
wiki Discussion
petrkalash2
wiki
(Discussion)
Forum for wiki comments
Last updated: 2025-03-17
blog Discussion
petrkalash2
blog
(Discussion)
Forum for blog comments
Last updated: 2025-03-17
Home
hassaank
wiki
(WikiPage)
Project Members: hassaank (admin)
Last updated: 2025-03-17
Post by fmon on Modbus TCP client reconnection problem
CODESYS Forge
talk
(Post)
Hello, I am using codesys Modbus TCP client (4.4.0.0) to communicate with a python modbus server (package pyModbusTCP). I first start my python server on the distant machine. After a fresh codesys compilation, a plc connection/transfer and a PLC run, the modbus connection is OK. Every time in this context the connection is created correctly. When I shut down the server, the modbus connection falls, that is normal. When I restart the python server, impossible to recreate the modbus connexion. With the client autoreconnection, I see on my server that the client tries to connect but unsuccesfully. I have the following message : DEBUG:pyModbusTCP.server:accept new connection from ClientInfo(address='192.168.1.20', port=33476) DEBUG:pyModbusTCP.server:Exception during request handling: NetworkError('recv return null') I tried to stop the codesys client and to restart it with these commands : Modbus_TCP_Client.xStop := True; // Or False Modbus_TCP_Client.Enable := True; // Or False Modbus_TCP_Server.Enable := True; // Or False I tried to confirm the error manually to force reconnection with: Modbus_TCP_Server_Motors.xConfirmError := TRUE; I tried also this command to STOP/RESET/START client and server (codesys side) but nothing happens : status_client := Modbus_TCP_Client.SetCommunicationState(eRequestedState := DED.DEVICE_TRANSITION_STATE.STOP); // .RESET & .START The answer of this function when executed is "status_client = NOT_SUPPORTED". Is it normal ? It seems that is a socket problem, but I do not understand if it is on the client or server side. I tried a modbus simulator called "ananas.exe" and the result is the same. Impossible to get a modbus client reconnection. What is different at the first client connection and at a reconnection attempt ? Thanks for your help
Last updated: 2025-03-17