wiki Discussion
karol-abktech
wiki
(Discussion)
Forum for wiki comments
Last updated: 2024-02-14
Home
karol-abktech
wiki
(WikiPage)
Project Members: karol-abktech (admin)
Last updated: 2024-02-14
(no subject)
karol-abktech
wiki
(Thread)
Last updated: 2024-02-14
Post by karol-abktech on Raspberry and problem with runtime
CODESYS Forge
talk
(Post)
Hi, My problem is with raspberry pi 4 with 2 GB ram,. Install codesys is correct but runtime works only few seconds or I can connect with device few seconds. I can ping raspberry and in system info I can see " !!!! Warning: no runtime license - running in demo mode(~2 hours)" but it is 2 minutes after runtime. When I press Start runtime I have another few seconds when I can connect to raspberry. After this time I couldn't find device. Of course, reapet start runtime works every time on few second. Raspberry is new and works with fresh install raspberry os 32 bit. Where should I start looking for solve of my problem ?
Last updated: 2024-02-14
Post by rh-pk on v3.5 SP19 - Modbus TCP Devices - Channel Limit?
CODESYS Forge
talk
(Post)
Hi, i found a solution for me. I had installed a 'old' version of CoDeSys (3.5.18 P5). I tried to add channels there, which works fine. I created a new project, added an Ethernet-Port, added a Modbus-Master and then I copied the ModBus-Slave from my working project to the new project. Now I could add more channels. I add the channels 10 and 11. Then I deleted (please make a backup before :-) the original ModBus-Slave in my working project and copied the extended Slave back to my working project. Surprisingly it is now possible to add new channels. Maybe this will help you.
Last updated: 2024-02-14
wiki Discussion
rh-pk
wiki
(Discussion)
Forum for wiki comments
Last updated: 2024-02-14
blog Discussion
rh-pk
blog
(Discussion)
Forum for blog comments
Last updated: 2024-02-14
(no subject)
rh-pk
wiki
(Thread)
Last updated: 2024-02-14
Home
rh-pk
wiki
(WikiPage)
Project Members: rh-pk (admin)
Last updated: 2024-02-14
Post by elektron785 on CAN-Bus in Demo-Version
CODESYS Forge
talk
(Post)
Es funktioniert nun. Ich hatte die SYNC-Erzeugung im CANOpen-Manager vergessen. Mit dessen Aktivierung empfange ich die Daten in der Soft-SPS. Vielen Dank für die Hilfe bis hierhin :) Btw: Die PDO's waren standardmäßig als Übertragungstyp zyklisch-synchron eingestellt.
Last updated: 2024-02-14
CAN-Bus in Demo-Version
CODESYS Forge
talk
(Thread)
CAN-Bus in Demo-Version
Last updated: 2024-02-14
wiki Discussion
jackbrady
wiki
(Discussion)
Forum for wiki comments
Last updated: 2024-02-14
blog Discussion
jackbrady
blog
(Discussion)
Forum for blog comments
Last updated: 2024-02-14
(no subject)
jackbrady
wiki
(Thread)
Last updated: 2024-02-14
Post by amy123 on CSV Utility CANNOT_OPEN_DIRECTORY
CODESYS Forge
talk
(Post)
Hello, I tried using the CSV Utility SL Example from the CODESYS IIoT Libraries SL. No matter what path I try, I can not get the InitSave to work from CSVWRitersSTExample, line 2. It always gives the error 'CANNOT_OPEN_DIRECTORY'. I am running this on an Windows Azure VM, with Codesys Control Win V3 x64. I added a folder called 'temp' to my C: so that the default 'C:/temp' would work. However it gives CANNOT_OPEN_DIRECTORY. I tried updating to 'C:\temp' with the same result. Any help would be greatly appreciated!
Last updated: 2024-02-14
Post by jackbrady on Function Blocks and arrays of function blocks
CODESYS Forge
talk
(Post)
Hello, I am new to Codesys and PLC programming in general (please go easy ha!) I'm not looking for code to be written for me just some help and pointing in the right direction. I am writing some code to send commands to a relay based on input values (to put it simply). Quite basic stuff. I have wrote a function block that takes a global variable (Open_command:BOOL) and outputs to another global variable (Opened : BOOL). The function block is simulating a device so I'll eventually get the globals from that. I now need to create multiple versions of this function block/ device (lets say 100) but I need each iteration of that function block to reference it's own relevant global variable. I think that the best way of doing this would be to use arrays, although I could be wrong. I am aware that for up to 100 instances I could very well manually assign everything but that seems rather time consuming and I want a fancier way of doing it. Here is a very basic example of what I am looking to do, please note I have not written this in proper code it's just to show what I mean. Global Variables V[0-100] int Open_command [0-100] Bool Opened [0-100] Bool Function Block var input x : BOOL Var output y : BOOL if x then y = TRUE ELSE y = FALSE The input to my function block will be Open_command, output will be Opened Example code. If V[x] > 10 then Open_command [x] = TRUE ELSE Open_command [x] = FALSE (So when V1 goes above 10 I need Open_command1 = TRUE therefore initiating FB1 output. V2 > 10, open_command2 = True > FB2 output V3 > 10, open_command3 = True > FB3 output ... ... ) What I can't seem to figure out is how to tie all this together, I have read through the codesys documentation and if anything it has confused me more! ha. Apologies for the poorly written post but hopefully you understand what I am trying to get at. Thanks, Jack
Last updated: 2024-02-14
Post by eschwellinger on CSV Utility CANNOT_OPEN_DIRECTORY
CODESYS Forge
talk
(Post)
https://forge.codesys.com/forge/talk/Engineering/thread/cf52f54a05/
Last updated: 2024-02-14
Home
jackbrady
wiki
(WikiPage)
Project Members: jackbrady (admin)
Last updated: 2024-02-14
Post by eschwellinger on CSV Utility CANNOT_OPEN_DIRECTORY
CODESYS Forge
talk
(Post)
https://forge.codesys.com/forge/talk/Engineering/thread/cf52f54a05/
Last updated: 2024-02-14
Post by amy123 on CSV Utility CANNOT_OPEN_DIRECTORY
CODESYS Forge
talk
(Post)
That solved it, thank you for the swift resolution! :) It would be fantastic ,if bandwidth permitting, the placeholder 'C:/temp' could be updated to 'C:\Program Files\CODESYS 3.5.19.60\GatewayPLC'. Anyway, thanks again for your assistance!
Last updated: 2024-02-14
Post by eschwellinger on Raspberry and problem with runtime
CODESYS Forge
talk
(Post)
will be solved with 4.11.0.0 release scheduled tor 20th February
Last updated: 2024-02-14
Post by yannickasselin on json utilities not reading or writing files
CODESYS Forge
talk
(Post)
Last updated: 2024-02-14
CSV Utility CANNOT_OPEN_DIRECTORY
CODESYS Forge
talk
(Thread)
CSV Utility CANNOT_OPEN_DIRECTORY
Last updated: 2024-02-14
Post by nearow on TargetVisu not accepting touch inputs
CODESYS Forge
talk
(Post)
Good day, Currently running a project on a windows 10 IPC with TargetVisu. the project starts and runs but the TargetVisu screens will not accept a touch on the monitor but will work with a mouse. I have the option to use as a touchscreen active. I did not put my license on the device just yet. Do you have to have the license activated on the device before the TargetVisu will work via a touch? running Codesys v3.5 SP 19 Patch 6, 64bit. device is Codesys Control Win v3 X64
Last updated: 2024-02-14
Post by jtebokkel on Access to the path *** is denied
CODESYS Forge
talk
(Post)
I am also having this issue. It was working fine for the first 2ish months and is now throwing this error. I can just try and go online again a second time and it works. I'm wondering if there is an environmental variable or something that isn't set that is causing it to use an empty path as a temp directory. The empty path will be the location the app is running from which is that path C:\Program Files\CODESYS 3.5.19.50\CODESYS\Common. The permissions don't allow a normal user to write to that directory which causes the error. It also only seems to happen when there are changes or the build has been cleaned.
Last updated: 2024-02-14