blog Discussion
vietnam-coder
blog
(Discussion)
Forum for blog comments
Last updated: 2026-03-24
Post by poliautomacao on Absolute movement controlled by an external encoder.
CODESYS Forge
talk
(Post)
Hello, I made this configuration, I'm moving the encoder value to SM_Driver_PosControl.in.wActPosition. When I make the absolute movement of my PosControl axis, my physical drive axis rotates perfectly, but I noticed that the movement is not followed by the encoder. That is, if I hold the encoder and keep it in position 0, the PosControl axis makes the absolute movement of 314 mm and stops, which is strange because the encoder is at 0. Theoretically, the PosControl axis should accelerate to try to compensate for the movement error. I haven't yet achieved perfect functionality.
Last updated: 2026-03-24
_NEW when used with classes and interfaces. Interface shows "Hidden Instance" in watch.
CODESYS Forge
talk
(Thread)
_NEW when used with classes and interfaces. Interface shows "Hidden Instance" in watch.
Last updated: 2026-03-24
Home (version 1) discussion
vietnam-coder
wiki
(Thread)
Home (version 1) discussion
Last updated: 2026-03-24
Post by aapostolidis on _NEW when used with classes and interfaces. Interface shows "Hidden Instance" in watch.
CODESYS Forge
talk
(Post)
Hello, im using dynamic memory allocation with the NEW()-operator. When i instanciate a class with the NEW()-operator and want to debug/watch the interface of the class, the watch is only showing "Hidden Instance" (See attached screenshot). Is there any possibility to debug the interface data ? The interface is working properly but the debugging by the watch is not possible, what is a big disadvantage. Thank you. Best Regards, Alexander
Last updated: 2026-03-24
Post by lukasz on Unresolved reference when trying to upload to Codesys Runtime V3
CODESYS Forge
talk
(Post)
Hello! I'm working with Codesys SP21 Patch 4. The project builds without any errors. When trying to upload my project to Codesys Runtime V3 x64 I get a lot of Unresolved Reference errors, all with FU- at the start and then -CLOSELAYER2, -GETBUSINFO, -GETFRAME etc. I also get a error pop-up that I should 'update device' in the project but it's not specified to which version or anything useful really.There's also not much to choose from. When I check Runtime version in the systray I get 3.5.21.40 and it's the same as I have set up in the project as the device. All information I get is that it should be clear from the errors but no useful information is provided in the errors. Do I need to install some library? I checked other posts and for different reference error and this was the answer. Thanks in advance!
Last updated: 2026-03-25
wiki Discussion
lukasz
wiki
(Discussion)
Forum for wiki comments
Last updated: 2026-03-25
blog Discussion
lukasz
blog
(Discussion)
Forum for blog comments
Last updated: 2026-03-25
(no subject)
lukasz
wiki
(Thread)
Last updated: 2026-03-25
Home
lukasz
wiki
(WikiPage)
Project Members: lukasz (admin)
Last updated: 2026-03-25
Home
pietje
wiki
(WikiPage)
Project Members: pietje (admin)
Last updated: 2026-03-25
Home (version 1) discussion
thomasrek31
wiki
(Thread)
Home (version 1) discussion
Last updated: 2026-03-26
blog Discussion
thierry-b
blog
(Discussion)
Forum for blog comments
Last updated: 2026-03-26
Home
tommyk-mar
wiki
(WikiPage)
Project Members: tommyk-mar (admin)
Last updated: 2026-03-26
(no subject)
tommyk-mar
wiki
(Thread)
Last updated: 2026-03-26
Post by tommyk-mar on Smooth path is not working with SMC_NCInterpreter
CODESYS Forge
talk
(Post)
Hello, Im using SMC_NCInterpreter and SMC_NCReadFile2 to read gcode program for CNC machine and what I have observed is that G51 and G52 is not smoothing the path. Machine stops in every point, what could I do to make machine pass through the points without stopping or what could allow me to use smooth path corretly if I use NCInterpreter. Im using it because I want to add variables to my gcode and its not possible directly from the CNC editor thats why I do use external file. Any ideas?
Last updated: 2026-03-26
Home (version 1) discussion
tommyk-mar
wiki
(Thread)
Home (version 1) discussion
Last updated: 2026-03-27
wiki Discussion
hubhub
wiki
(Discussion)
Forum for wiki comments
Last updated: 2026-03-27
blog Discussion
hubhub
blog
(Discussion)
Forum for blog comments
Last updated: 2026-03-27
(no subject)
hubhub
wiki
(Thread)
Last updated: 2026-03-27
Home
hubhub
wiki
(WikiPage)
Project Members: hubhub (admin)
Last updated: 2026-03-27