Hi, I'm trying to connect to Turck's TX715 remotely via cellular connection through IXON. It was working fine before even though it took like 5mins to upload my code. Now I can only ping the device. Once the download reaches 99% or 100%, I lost connection. When I try to reconnect again, it just couldn't find the device. I need to restart my computer to find it again only to lost connection again at 100% download. Any help would greatly appreciated.
Hi, I would like to display a webpage but I keep getting the error attached. Is there a workaround to this or the web browser is just too old to handle the webpage? The webpage works fine on my Chrome.
Hi, I would like to display a webpage but I keep getting the error attached. Is there a workaround to this or the web browser is just too old to handle the webpage. The webpage works fine on my Chrome.
Hi all I came across this error when I tried to open task configuration after I applied RT kernel. Doesn't matter if I logged in or logged out, I still can't open my task configuration. Any ideas why? RT kernel details: version 5.10.63-rt52-v7+ #1 SMP PREEMPT_RT /etc/systemd/system.conf: RuntimeWatchdogSec=10 ShutdownWatchdogSec=10min /boot/cmdline.txt: dwc_otg.fiq_fsm_enable=0 dwc_otg.fiq_enable=0 dwc_otg.nak_holdoff=0 /etc/init.d/codesyscontrol: do_status if [ $? -eq 0 ]; then rm $PIDFILE echo...
I'm using the single core CODESYS version. Doesn't that mean the interrupt will also occur in the same core?
Thanks😄! I'm using the single core version In your example above, does this mean that if you use IRQBALANCE_BANNED_CPUS command, CODESYS would not be able to handle any interrupt events of the controller? Attached is the result of applying your solution. It seems core 2 still empty. I expect CODESYS would run there. Perhaps because I'm using a single core version and CODESYS always default to core 0. In my second attempt, I set taskset to core 0 and set isolcpus=0 in cmdline. I guess it works? But...
Thanks😄! I'm using the single core version In your example above, does this mean that if you use IRQBALANCE_BANNED_CPUS command, CODESYS would not be able to handle any interrupt events of the controller? Attached is the result of applying your solution. It seems core 2 still empty. I expect CODESYS would run there. Perhaps because I'm using a single core version and CODESYS always default to core 0. In my second attempt, I set taskset to core 0 and set isolcpus=0 in cmdline. I guess it works?
Thanks😄! I'm using the single core version In your example above, does this mean that if you use IRQBALANCE_BANNED_CPUS command, CODESYS would not be able to handle any interrupt events of the controller? Attached is the result of applying your solution. It seems core 2 still empty. I expect CODESYS would run there. Perhaps because I'm using a single core version and CODESYS always default to core 0. In my second attempt, I set taskset to core 0 and set isolcpus=0 in cmdline. I guess it works?