I am looking into upgrading my CODESYS software from SP9 to SP17. I noticed that there is a file system change between the two versions. On SP17, the "PlcLogic" directory is not the root directory anymore. I previously saved/loaded files from the PlcLogic which was originally the root directory using SP9. Is there a guide on how to write/read files from the PlcLogic directory? Do I need to update any permissions or rights to write files to a folder in PlcLogic?
I have a Real (0.05) and I want to convert it into a Word so I can send it through Modbus. I can send it to two register locations so 2 Words would work. I have the OSCAT Basic library installed and I am using REAL_TO_DW. This turns the Real 0.05 to a DWORD of 1028281787. Then I use WORD_OF_DWORD to get Bytes 0 and 1. However, the two words I get are 15690 and 22000. Am I going about this the wrong way? Would a Real even closer to 0 (like 0.0000005) be harder to send through Modbus?
Is this the correct screenshot needed?
Hi, I right clicked Device -> Update Device and clicked CODESYS Control Win V3 x64 -> Update Device. I'm still not able to select the device and click "OK" when I Scan Network.
I have a CODESYS project open and CODESYS Control Win V3 is running with "Start PLC" selected. Under Devices, if I click "Scan Network", nothing shows up under the Gateway. If I go to Device -> Filter network scans by Target ID (unchecked), then a Device pops up with the Target Name CODESYS Control Win V3 and a Device Address of 0301.A0AA. However, I can't connect to the Device. https://help.codesys.com/webapp/_cds_winv3_firststeps;product=core_codesys_control;version=3.5.15.0 I tried following the...