Activity for kennymillar

  • kennymillar kennymillar posted a comment on discussion Runtime πŸ‡¬πŸ‡§

    I finally figured it out - the current R-PI Runtime isn't compatible with the latest Raspbian build. I got this working by downloading the Legacy build of raspbian and skipping the upgrade step. Now it works and I have the device licenced.

  • kennymillar kennymillar posted a comment on discussion Runtime πŸ‡¬πŸ‡§

    Hate to say, but now in 2023 this issue is back again. Latest Raspbian on Pi4B will kill the service after 30 seconds with "ooops... this runtime was built for RASPBERRYPI. Hardware version or firmware version not supported! (-6, 0x00000BB8, 0xFFFFFFFB)"

  • kennymillar kennymillar posted a comment on discussion Runtime πŸ‡¬πŸ‡§

    The end of the /tmp/codesyscontro.log shows this: 2023-03-21T11:51:38Z, 0x00000400, 1, 0, 0, CmpBACnet 1024 BACstack information 2023-03-21T11:51:38Z, 0x00000400, 1, 0, 0, version = 15.0.1.1 2023-03-21T11:51:38Z, 0x00000400, 1, 0, 0, __BYTE_ORDER = 1234 2023-03-21T11:51:38Z, 0x00000400, 1, 0, 0, TARGET_IEEE_FP_FORMAT = 1 2023-03-21T11:51:38Z, 0x00000400, 1, 0, 0, TARGET_FP_BIG_ENDIAN = 0 2023-03-21T11:51:38Z, 0x00000400, 1, 0, 0, TARGET_DP_BIG_ENDIAN = 0 2023-03-21T11:51:38Z, 0x00000400, 1, 0, 0,...

  • kennymillar kennymillar modified a comment on discussion Runtime πŸ‡¬πŸ‡§

    Thanks for your quick reply. Using TOP I think can see what is happening. The runtime starts when I use CODESYS on my WIndows PC to start it on the R-PI, but it only runs for a short while (about 35 seconds or so). I captured the system log on the PI during a full cylce (from pressing start in CODESYS to it terminating on the PI) which shows this: Mar 21 11:34:29 videopi sshd[8593]: Accepted publickey for kenny from 192.168.1.140 port 52664 ssh2: RSA SHA256:C5IrEO5dDzwORd/kGPoJH69xym0c35CTeQUUJmZggao...

  • kennymillar kennymillar posted a comment on discussion Runtime πŸ‡¬πŸ‡§

    Thanks for your quick reply. Using TOP I think can see what is happening. The runtime starts when I use CODESYS on my WIndows PC to start it on the R-PI, but it only runs for a short while (about 35 seconds or so). I captured the system log on the PI during a full cylce (from pressing start in CODESYS to it terminating on the PI) which shows this: Mar 21 11:34:29 videopi sshd[8593]: Accepted publickey for kenny from 192.168.1.140 port 52664 ssh2: RSA SHA256:C5IrEO5dDzwORd/kGPoJH69xym0c35CTeQUUJmZggao...

  • kennymillar kennymillar posted a comment on discussion Runtime πŸ‡¬πŸ‡§

    I've followed all the steps to set up the Rapberry PI Runtime on an R-PI. In Codesys v3.5 SP18 I can see my PI and "System Info" shows that all is well. Now I am trying to install the licence for the PI that I just bought. Folling the instructions online I bring up the licence manager, select Device, then Softcontainer. When the "Select Device" dialog appears, I cannot see my R-PI. I see one Gateway "Gateway-1" and when I click "Scan network" nothign is found. Yet, I can see my Raspberry PI in the...

1