Since version 19 they changed how file access is handle. There are two solutions: 1. You change where the file is stored (need to go to: /PlcLogic/) 2. You can, if you don´t want to store at PlcLogic, add the following line in the CODESYSControl.cfg under [SysFile]: ForceIecFilePath=0 The CodesysControl.cfg is at C:\ProgramData\CODESYS\CODESYSControlWinV3x64\xxPROJECT_NUMBERxx\ Here the email they sent me: "with the 3.5.19 Version we changed how files are handled. See following issue: CDS-81506 -...
Since version 19 they changed how file access is handle. There are two solutions: 1. You change where the file is stored (need to go to: /PlcLogic/) 2. You can, if you don´t want to store at PlcLogic, add the following line in the CODESYSControl.cfg under [SysFile]: ForceIecFilePath=0 The CodesysControl.cfg is at C:\ProgramData\CODESYS\CODESYSControlWinV3x64\xxPROJECT_NUMBERxx\ Here the email they sent: "with the 3.5.19 Version we changed how files are handled. See following issue: CDS-81506 - CODESYS...
Codesys changed the license system (https://store.codesys.com/en/howto_applicationbasedlicenses). How do I know which license package my project will fit into? - I understood that one of the determinants of the package is the size of the application, but where can I see this size? (I put attached a picture with some size information I see). - My application uses 8 cores. I saw a package that says up to 4 cores. How to use 8 cores? - My application has no I/O. It only reads TCP/IP packets from 3 sensors...
Yes. I configured this Access Control for each POU, but this is only valid for Online. In offline, the user can view and change all the program. For now, I'm putting a password to open the entire program, but I would like that users could view/ change parts of the program.
Yes. I configured this Access Control for each POU, but this is only valid for Online. In offline, the user can view and change all the program.
I made an application in Control Win 3.5.SP16. I created users and groups and defined to each POU the permissions (View/ Modify/ Remove) for each group. However, these settings are only valid for the online program. If someone opens my application, they see the entire program. I would like that the offline program also require a user login so that only the permited part of the program appears to the user according to the permissions defined for the user's group. Is this possible?
Yes. For some reason it lost CodesysControl.cfg I'm doing a backup of it now to be able to restore, but this shouldn´t happen.
Unresolved references only in a specific machine with "Control Win"