Activity for mohan1
-
mohan1 posted a comment on discussion Forge 🇬🇧
Thanks for your quick reply, I tried to run same as it is given in Codesys control for Raspberry pi Examples, I have done no changes, It also shows every thing running without error, but reading on channel 0 not changing to non zero, Do I need to make any changes any other place apart from Max speed ? I reduced it yo 50000 but still not getting result I am attaching screenshot my work, please look at it and reply as when you are free. Also is there any other way to read analog value in Raspberry...
-
HELLO EDWIN, HERE IS MOHAN PATEL FROM INDIA, I AM RTRYING TO READ ANALOG VALUE USING MCP3008 WITH RASPBERRY PI , IT LOOKS EVERY THING OK BUT ON MY CHANNEL1 , ONLY 0 VALUE DISPLAY, PLEASE GIVE ME CORRECTION WHERE I AM MISSING OR WORNG. I AM ATTACHING THE IMAGE OF MY PROJECT. THANK YOU IN ADVANCE.
-
HELLO TEAM, I am trying to read analog values from arduino uno through Raspberry pivia I2C protocol. Previously I was able to read but my Raspberry got fuse because of some voltage issue, i tried to use another Raspberry pi zero W, but now in program every thing show ok, all bus status are showing running ok, but I am unable to read data, it shows 0 value only, when I swipe SCL WITH SDA it is showing 65k count. what may be wrong I can't trace out. can any body help to get resolve this issue? attached...
-
HELLO TEAM, I am trying to read analog values from arduino uno through Raspberry pivia I2C protocol. Previously I was able to read but my Raspberry got fuse because of some voltage issue, i tried to use another Raspberry pi zero W, but now in program every thing show ok, all bus status are showing running ok, but I am unable to read data, it shows 0 value only, when I swipe SCL, SDA cable it is showing 65k count. what may be wrong I can't trace out. can any body help to get resolve this issue? attached...
-
Thanks Team Codesys, With your guidance I am able to connect with Codesys device. Please guide me to connect Arduino Uno with codesys control Win V3 with serial port, I am trying to connect but modbus slave bus is not getting run. Do we need to prepare Arduino in Arduino IDE also ? I tried all steps but i am unable to get output on the hardware pin. If you can help to resolve this problem, I will really appreciate you. Thanks On Mon, Jan 3, 2022 at 1:23 PM RolandWagner no-reply@codesys.com wrote:...
-
Good morning Roland Wagner and Team, Thank you for your kind support, I found a problem about User Authentication while user login, it is giving me wrong used name or password , all time when I tried to login. How to create or read User Authentication Name and password. In Codesys Control Win V3. [image: image.png] [image: image.png] Please help me to resolve this problem. Thanks and Regards On Wed, Dec 29, 2021 at 3:49 PM Mohan Patel mohan.patel@ppsu.ac.in wrote: Thank you for your kind support,...
-
Thank you for your kind support, I succeeded for configuring Raspberry pi 3b+, I used codesys control for raspberry pi 4.2.0.0 Codesys V3.5 V17.10 SP 1 - 32 bit system, also installed Codesys edge gateway. I enabled all interfaces in OS. and things got workout. Thank you for your kind support. I am going to start engineering student training from Saturday 1st JAN2021. I will share details of Progess. On Wed 29 Dec, 2021, 1:16 AM eschwellinger, no-reply@codesys.com wrote: I would use the Gateway on...
-
Good Morning BR EDWIN, Will you please give steps to prepare and Connect Raspberry Pi 3B+ with Codesys V3.5SP17+ 64bit, or 32Bit, I need your help because I am facing problem connecting Raspberry Pi with Codesys since last four days and not getting solution, no one in my area is know to help or guide.
-
Hello Edwin, I Have installed Raspberry OS in SD Card , Connected Raspberry Pi and My PC through Mobile Hot SPOT and both are getting connected and detected to Hot spot, But in Codesys It is not detected while scan device, What can be wrong with my installation or where I am missing ?, My previous card installed before one year is working fine, but new installation not . I am trying since last four days continuously but I am failed. Please give proper steps to go ahead. Thanks
-
Problem with connection to Raspberry Pi 3B+