Mine is a Raspberri Pi "device". I have however also tried control Win, IOT2050 (Linux), and exor eSmart07 (linux) all with the same errors. I did the same thing successfully with a Pi 2-3 years ago. Profinet master (controller) functions fine.
I have the exact same problem. Did anyone come forward with an answer to this? My version is 3.5.19 with all updates installed as of this posting. I have added the following to my "CODESYSConfig" file: [SysEthernet] QDISC_BYPASS=1 Linux.ProtocolFilter=3 [SysSocket] Adapter.0.Name="eth0" Adapter.0.EnableSetIpAndMask=1 to no success. I have attached my log file from the Profinet device.
I was searching here and found that Edwin had left a link to a different version of pcap. I downloaded and installed and this is my new log file. Still no PN device however.
Can someone tell me if the PN IO device mode works on any Codesys runtime? So far I have tried Pi, Linux ARM on a iot2050, IOT2040 runtime, Exor eX707 and now Control win V3. I am attempting to connect them as a slave to an S7-1200 CPU. So far I havnt even the slightest glimmer of hope that it will work. My latest attempt is Control Win V3. Codesys version is 3.5.19. Win10pcap is installed. Below is the log file from the "Codesys Profinet Device". I am totally at wits end here on this but REALLY...
Just as a follow up I decided to try with my Exor ESmart panel. As you can see here, I have the exact same issue with the Exor as I do with the Windows PC. Version on the Exor is 3.5.16.30. EDIT: I finally got a clue. I had an error box that my Profinet stack was not running. All I could come up with in help was this: https://help.codesys.com/webapp/_pnio_runtime_configuration_device;product=core_ProfinetIO_Configuration_Editor;version=3.5.16.0 . Unfortunately to me these instructions are "cryptic"...
Just as a follow up I decided to try with my Exor ESmart panel. As you can see here, I have the exact same issue with the Exor as I do with the Windows PC. Version on the Exor is 3.5.16.30.
Im running a PC with Codesys Control V3. I have used version 3.17.0 and 3.19.0. For some reason I cannot get Profinet to work as either a controller (not shown in attachment) or as a device (shown in the attachment). My only clue is the Profinet_IOTask not running. I have absolutely nothing else to go on. It does not run either as controller or device. I did the export of the proper GSDML files with each version I tested as a device. Im trying to run it as a device under the Siemens processor (what...
Thanks for the help and the link. I did this and went to ....\Codesys control RTE\CmpEt1000 (and 100) MPD. It showed me no compatible drivers. The Ethernet device I have is an Intel I211 Gigabit...... Does this mean my hardware is not compatible with RTE? What adaptors are compatible with RTE? If I read the directories properly there is the Intel 1000 / 100 and 2 Realtech ethernet adaptors. Is this correct? If all of this is correct, will the standard "Control Win (non-RTE)" run ok or do I have a...