Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

Talk

FAQ - Frequently asked Questions about CODESYS
FORUM LATEST POST # TOPICS
Engineering πŸ‡¬πŸ‡§

Discussions about the CODESYS Development System, IEC programming, CODESYS Professional Developer Edition

EtherCat Slaves diagnosis
by albzen
33 minutes ago
4988
Runtime πŸ‡¬πŸ‡§

Related questions to SoftPLCs e.g. Raspberry Pi, Beaglebone, IoT2000 and other platforms

Connect local Asem HMI runtime to local Codesys Control Win V3 x64
by vcamp
23 hours ago
2087
Visualization πŸ‡¬πŸ‡§

Realizing operator screens with CODESYS HMI, Targetvisu, Webvisu

Webvisu IE Page Scroll Bars
by stuartjr
1 day ago
878
Motion πŸ‡¬πŸ‡§

Realizing single or multi axis motion control, CAM, CNC and Robotic applications

High Cycle Times for SoftMotion_PlanningTask when using AxisGroup
by manuknecht
2024-03-22
429
Codesys V2.3 πŸ‡¬πŸ‡§

Forum about V2.3

Upload program
by dakshakrd45
3 days ago
2148
Deutsch πŸ‡©πŸ‡ͺ

German forum

Github Actions CI/CD tasks - development topic
by kevinrn
1 day ago
4432
Automation Server πŸ‡¬πŸ‡§

The Industry 4.0 administration platform for users and operators of CODESYS compatible controllers

File transfer via visu and codesys automation server
by eschwellinger
2024-03-11
30
Forge πŸ‡¬πŸ‡§

Discussions about CODESYS Forge projects and features of the CODESYS Forge website

I do not have any reedings in RUN MODE from MPU6050........
by mimodia1
10 hours ago
170

Recent Activities

    CODESYS Forge

  • albzen posted a comment on discussion Engineering πŸ‡¬πŸ‡§

    Hello everybody, I'm working on a RunTime Plc (Codesys 3.5.16/18.20) connected to an EtherCat bus with many devices. The bus has some communication fault but I don't know how understand which is the device or the cable that has the trouble. To understand the cause of the problem I would like to read the WKC (Working counter) of the devices (0x0300...0x030C), how is explained in EtherCat documents, but it seems that the read of the counter is disabled. Attached there is an extract of the Ethercat...

  • albzen posted a comment on discussion Engineering πŸ‡¬πŸ‡§

    Hello everybody, I'm working on a RunTime Plc (Codesys 3.5.16/18.20) connected to an EtherCat bus with many devices. The bus has some communication fault but I don't know how understand which is the device or the cable that has the trouble. To understand the cause of the problem I would like to read the WKC (Working counter) of the devices (0x0300...0x030C), how is explained in EtherCat documents, but it seems that the read of the counter is disabled. Attached there is an extract of the Ethercat...

  • mimodia1 modified a comment on discussion Forge πŸ‡¬πŸ‡§

    Good morning, mecke96. Exactly the same thing happens to me, although I have not done the part of executing a .py file. It only reads the temperature and the counter, but the other values are zero as in your image "no readings". I have tested the MPU6050 device on an Arduino and it works. Could you tell me if you solved it?

  • mimodia1 posted a comment on discussion Forge πŸ‡¬πŸ‡§

    Good morning. Exactly the same thing happens to me, although I have not done the part of executing a .py file. It only reads the temperature and the counter, but the other values are zero as in your image "no readings". I have tested the MPU6050 device on an Arduino and it works. Could you tell me if you solved it?

  • jetme posted a comment on discussion Forge πŸ‡¬πŸ‡§

    i'm using FB Ramp_INT function to ramp my pump up and down but I will like to ramp up at a different time and also ramp down at a different time. How can I do that.

  • vcamp posted a comment on discussion Runtime πŸ‡¬πŸ‡§

    Solved: update all the software to the latest version, set optional user management, have a symbol configuration, check tasks priorities.

  • dagsupport posted a comment on discussion Engineering πŸ‡¬πŸ‡§

    Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks

  • dagsupport posted a comment on discussion Engineering πŸ‡¬πŸ‡§

    Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks

  • dagsupport posted a comment on discussion Engineering πŸ‡¬πŸ‡§

    Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks

  • dagsupport posted a comment on discussion Engineering πŸ‡¬πŸ‡§

    Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks