CODESYS Forge - CODESYS Forge / Talk / Codesys V2.3 🇬🇧: Searching for ini_file library in codesys

Searching for ini_file library in codesys

Forum: Codesys V2.3 🇬🇧

Created: 2011-12-08

Updated: 2011-12-14

Nefus - 2011-12-08

Hi,
I'm looking for an "ini_file" library for Codesys 2.3.x. (I'm using Wago's PLC).
I found a thread talking about a 'ini_file_v10' here :
l viewtopic.php?f=2&t=1229&hilit=ini+file#p2179 l
It seems to be a Berghof library...
Does anyone knows about a similar library generic for codesys, or for Wago's PLC ?

Thank you very much for your help.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

kberlin - 2011-12-09

Hi,

Have a look at the Oscat library w www.oscat.de w . Especially at tje NET part http://www.oscat.de/downloadmanager/vie ... twork.html

This has a some functionality for parsing ini-files. I haven't used it myself though.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Nefus - 2011-12-09

Hi,
Thank you for your help.
This library seems to be exactly what I'm looking for.
I will not have time today to take a look on it, but I will next week.

Bye.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

kberlin - 2011-12-09

Happy to help. Let me know how it went.

Have a nice weekend,
Kristian Berlin

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Nefus - 2011-12-14

Hi,

I took a look at this library yesterday : I was able to read ini files in my codesys project with Wago hardware. (I need to remove some elements from the library because there were too much functions blocks for my target (about 1300 for a max of 1023...)

Thank you once again for the link.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.