I have a PCAN-USB from PEAK in hand, I read somewhere in this forum saying that ifm controller like CR0020 can use PCAN-USB as an CAN bus adapter. While in CoDeSys communication parameter setup dialog, clicking button "new" can't bing up PCAN-USB option in the driver list. I believe PCAN-USB should appear in that list by means of some other way which I haven't figured out because I see in the installation package there is a directory called "gateway" that contains PCAN_USB.dll.
Can someone help me with this οΌ
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Dear freind
I had the same problem , no one here has helped . I bought an omega usb to serial converter which has communicated easily with my cr0020. You can pose your question from IFM support group too.
whish you lock.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Have you seen this manual? It's in German but put CCP into Babble fish. I thought I had an English version. I'll look. I have been using IXXAT for years so I don't know if it works.
I have a PCAN-USB from PEAK in hand, I read somewhere in this forum saying that ifm controller like CR0020 can use PCAN-USB as an CAN bus adapter. While in CoDeSys communication parameter setup dialog, clicking button "new" can't bing up PCAN-USB option in the driver list. I believe PCAN-USB should appear in that list by means of some other way which I haven't figured out because I see in the installation package there is a directory called "gateway" that contains PCAN_USB.dll.
Can someone help me with this οΌ
Dear freind
I had the same problem , no one here has helped . I bought an omega usb to serial converter which has communicated easily with my cr0020. You can pose your question from IFM support group too.
whish you lock.
I always use usb-to-serial converter with CR0020 controllers. And it is very interesting about PCAN-USB.
Have you any result? Does it work?
Have you seen this manual? It's in German but put CCP into Babble fish. I thought I had an English version. I'll look. I have been using IXXAT for years so I don't know if it works.
PEAK CAN Dongle fuer CoDeSys.pdf [219.04 KiB]