I have a project which was made few years ago with a V2.3 version of Codesys.
We don't have anymore this computer with the Codesys version which used to
work.
Now, I would like to use this project, I made a new install of Codesys V2.3.
The project can be opened but I can't upload it in a Wago 750-841 because
Codesys tell that the selected PLC profil doesn't match. I saw that there
is sometimes incompatibility versions between 750-841 firmwares and Codesys version
and I set ''Use alternative target ID'' on web server PLC settings but it still not work.
In Codesys, in my target settings, I don't have the 750-841. What can I do?
Thank you for your help
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I have a project which was made few years ago with a V2.3 version of Codesys.
We don't have anymore this computer with the Codesys version which used to
work.
Now, I would like to use this project, I made a new install of Codesys V2.3.
The project can be opened but I can't upload it in a Wago 750-841 because
Codesys tell that the selected PLC profil doesn't match. I saw that there
is sometimes incompatibility versions between 750-841 firmwares and Codesys version
and I set ''Use alternative target ID'' on web server PLC settings but it still not work.
In Codesys, in my target settings, I don't have the 750-841. What can I do?
Thank you for your help
Ask Wago. You need the target discriptions and it is typical to get them from the manufaturer of the hardware.
Regards,
Ralph
I contacted Wago, they send me a link to download a Codesys special version with 750-841 targets installed (CoDeSys_2.3.9.28).
It works now.
regards
Ferdez