I'm trying to use a can-tcp gateway model USR-CANET200 (https://www.usriot.com/products/can-to- ... erter.html) for programming Epec 3724 ECU from Codesys 2.3 but still not able to do it!
By USB-can interface I use these settings and everything is fine
with the TCP-CAN I've tried this but no way.. (note Can side I think is working: I see for led blinking. So I'm in doubt about TCP side especially which TCP port to use with Codesys and Epec..)
every suggestion is highly appreciated
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'm trying to use a can-tcp gateway model USR-CANET200 (https://www.usriot.com/products/can-to- ... erter.html) for programming Epec 3724 ECU from Codesys 2.3 but still not able to do it!
By USB-can interface I use these settings and everything is fine
with the TCP-CAN I've tried this but no way.. (note Can side I think is working: I see for led blinking. So I'm in doubt about TCP side especially which TCP port to use with Codesys and Epec..)
every suggestion is highly appreciated