CODESYS Forge - CODESYS Forge / Talk / Codesys V2.3 🇬🇧: Ladder - function blok

Ladder - function blok

Forum: Codesys V2.3 🇬🇧

Creator: oferdi

Created: 2009-12-10

Updated: 2009-12-10

oferdi - 2009-12-10

hi, again..i need little information..

for example we did a programme at ladder and with prg_LD

then we wrote a small programme at function blok..how to we connect between prg_LD and FBD_LD ...

thanks

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Anonymous - 2009-12-10

Originally created by: Mikhail Shvetsov

As far as I can see, at first you should realize completely the meaning of Function Block. Your Function Block must have instance (or several instances) in your PLC_PRG. “First steps with CoDeSys” shows how FB is used.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

oferdi - 2009-12-10

Thanks Michael but i wanna try to tell what i mean with pictures...

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Anonymous - 2009-12-10

Originally created by: Mikhail Shvetsov

In such case you should use PROGRAMM (not Function Block) for “fonk_at_ladder”. You can call this programm via “box with EN”. Look at image:

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

oferdi - 2009-12-10

spasibo Mikail..thanks

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.